![]() |
Actuator Spring Rates edit: will this fit?
firstly http://www.forgemotorsport.co.uk/con...roduct=FMAS049
2. it says spring 5-10 psi, does that mean it will work somewhere in that region? ie one day ill boost at 9psi and at 6psi anthor? 3. although it says t2 is there any reason why it wouldnt work on a t3? the t3 springs start at 7psi, thats more than i want. Thanks for your help Marc |
Re: Actuator Spring Rates
the T2 actuator has a shorter shaft. email them for the exact difference.
Those Forge actuators are made as a stock location replacement, but if you are going to do a custom mount then I'm sure you can get it to work. So you want a 5-6psi wastegate actuator? |
Re: Actuator Spring Rates
Yep 5-6psi.
im more interested in going around the track as opposed to stright line dragging so am only amining for around 220hp. Do you know of any other springs that will fit the t3? Cheers Marc |
Re: Actuator Spring Rates
will this spring fit into my actuator? or is it only for the external wastegates?
http://cgi.ebay.com/ebaymotors/5-83-...17667733QQrdZ1 |
Re: Actuator Spring Rates edit: will this fit?
same #### q every day >:(
carb spring or die :y |
Re: Actuator Spring Rates edit: will this fit?
Originally Posted by rprznt
same #### q every day >:(
carb spring or die :y |
Re: Actuator Spring Rates edit: will this fit?
start off loose then check boost
stretch spring, retest you get the idea testing required :) |
Re: Actuator Spring Rates edit: will this fit?
I did the carb spring thing for a while. For some reason it would spike bad when cold. So I took the soft spring out of my knock off Greddy Type-S and swapped it out for the T25 wastegate spring. It was a win-win, now I have a rock steady 5.5psi (can use boost controller to up it) and my BOV sounds better with the stiffer spring.
|
All times are GMT -5. The time now is 07:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands