88 CRX HF Race Car
Hello,
My name is Ben and I am from NW Ohio. I am new to this site/board and I must say hell of a job. It is refreshing to see a site dedicated to real performance by real working men. Anyway, today I purchased an 89 CRX HF today with the following items all uninstalled: Autopower unwleded 6 point roll bar kit, aluminum stock for dash, Autometer Ultra Lite speed, rpm, oil pres, temp, and volts gauges, and a Summit racing seat. The car has no drivetrain and a gutted interior. I want this car purely for drag racing. It need not be streetable. I have a few questions, and I figure you fellas could help me, so here goes: 1) What engine and tranny do you recomend. (Whatever engine I end up with, it will be turbocharged. 2) There is 0 wiring in the car, so what type of wire do you recomend for a custom wiring harness. Thanks, Ben |
Re:88 CRX HF Race Car
sounds like a fun project for a engine id go with any b series or even a h series. As far as wiring if you get a stand alone engine managment id would just get what ever they recomended.
Beau Keep us posted on your progress. |
Re:88 CRX HF Race Car
Thanks for the response Beau. Keep in mind everyone a fe things. 1st, I can weld fairly well, and have stick, tig, and mig welding equipment, as well as a plasma cutter. Secondly, I have a budget of about $8-10 thousand. (Sold my bike and my jetski) Third, I eventually want to hit 10s.
Thanks, Ben |
Re:88 CRX HF Race Car
well like i said keep us posted im starting a very simaler project except i started with a car that was a street car
Beau |
Re:88 CRX HF Race Car
I honestly would go with a system like hondata or zdyne. Other stand alone systems cost atleast 2000 grand with tuning. Go to the junkyard find a crx with all the wiring shouldn't cost more than 125.00.
|
Re:88 CRX HF Race Car
Bah.. Hondata and Zdyne are overrated..
EcuControl, and Ghettodyne will soon empower the world. I'll see to it. ;D ;D ;D |
Re:88 CRX HF Race Car
If you dont have a harness, you might as well just get a full standalone system.. speedpro/Accel/TecII/Motec/Haltech whatever, they sometimes come with some prefab wiring harnesses.
My goal is 10's with a D-series with a 10 thousand dollar budget... Jeff |
Re:88 CRX HF Race Car
my goal 13's with d16a6 with 2 K budget. totally posible
|
Re:88 CRX HF Race Car
i would go with a b16 and work it you will do 10s with a t3t4 turbo. good luck
|
Re:88 CRX HF Race Car
wouldnt it be a lot easyer to go with crv-tec Turbo run like 13 psi....
|
All times are GMT -5. The time now is 10:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands