is 8 psi ok to run...

Reply Subscribe

Thread Tools

Search this Thread

Mar 5, 2004 | 06:00 PM

hybrdcivic95

Guest

Posts: n/a

is 8 psi ok to run...

this is my last question, i hope, before the final install this w/e, but do you guys think its ok to run the stock 8psi of a t25 on a sotck d16z6? management for right now consists of walbro 255 intank pump, vortech fmu

, just for a couple of months until i get the $$ together for some real management..motor has 120K on it, no oil leaks all routine maint has been done, timins belts, valve adj, etc...
you guys think i could run 8 or should i knock it down a tad?

Mar 5, 2004 | 06:12 PM

jake2001z001

1.5 BAR

Joined: Jul 2003

Posts: 1,387

Re:is 8 psi ok to run...

I think 8 sounds good, Just make sure the fuel is there

Mar 5, 2004 | 06:15 PM

beerbongskickass

0.0 BAR

Joined: Dec 2002

Posts: 0

Re:is 8 psi ok to run...

I would probably go around 5 pounds with stock 240cc injectors.

Mar 5, 2004 | 06:37 PM

chevy

1.5 BAR

Joined: Oct 2003

Posts: 831

Re:is 8 psi ok to run...

15 psi is very good for a stock d series

Mar 5, 2004 | 07:04 PM

jake2001z001

1.5 BAR

Joined: Jul 2003

Posts: 1,387

Re:is 8 psi ok to run...

oh my bad, for some reason i thought he had 450cc injectors, yea dont go over 5 without upgraded injectors

Mar 6, 2004 | 07:08 AM

projekteg

3.0 BAR

Joined: Apr 2003

Posts: 11,057

Re:is 8 psi ok to run...

you can go up to about 8 safely with just an fmu, i wouldn't go any higher than that though, just for a little insurance, get some colder plugs, and retard you timing a bit and you should be fine.