60mm wastegate to big?
im in the last few days of fabrication on my chevy colorado
a few months ago a bought a 60mm wastegate and now im wondering if perhaps it might be to large. (is that possible?) i would hate for it to "pulse" and have to fabicate a new wastegate flange on the manifold the setup is a 3.5 inline 5 cylinder - auto trans - 61mm t3/t4 (.82 or .83 hotside) - air/water cooler - 80lb injectors - running e85 - at 10-12 lbs thanks in advance |
i dont think so especially on that kind of boost thats over two inches , but you have to take in consideration more surface area allows for more gas to pass through it but at high boost application it can push the "door" open prematurly but you be just fine
|
large is not a problem, its small that becomes a problem. the larger the wastegate the better it controls boost level. a larger wastegate will prevent boost spike.
|
Originally Posted by busa4
(Post 1306500)
large is not a problem, its small that becomes a problem. the larger the wastegate the better it controls boost level. a larger wastegate will prevent boost spike.
|
i swapped a friend for a 38mm. he needed a bigger one and i didnt really need one that big
i have done some basic tuning on the truck. it needs drag radials bad now. from a roll its spin city http://youtu.be/XzSeGiZbmJg |
sick set-up you got there! the videos were pretty bad azz as well. got any pics on the build posted yet?
|
All times are GMT -5. The time now is 01:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands