HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   450's (https://www.homemadeturbo.com/forced-induction-7/450s-68338/)

mike94se 10-11-2006 06:52 PM
Re: 450's
 
Originally Posted by claytonsmith
or theres always the third option where you shut the ---- up


search doesnt work
insert your gayass question that you cannot figure out site:www.homemadeturbo.com


Now ---- off ------

claytonsmith 10-11-2006 06:53 PM
Re: 450's
 
hahahahahah thanks

StanB 10-11-2006 06:58 PM
Re: 450's
 
Clayton, just chill the ---- out. This issue has been addressed many times before, and it pisses people off when the same question is being asked over and over again. The 450's are good for about 300 HP as stated earlier. If you use an adjustable FPR you should be able to push the limit to about 320 HP (more depending on the chance you want to take).

Go to RC Engineering's website or Google "calculating injector flow rate" and you will find formulas that can be used to tell you the HP rating when you plug in certain information.

claytonsmith 10-11-2006 07:03 PM
Re: 450's
 
oh im calm man.....im just screwing around


thanks for the info

JDMFantasy2K 10-11-2006 07:11 PM
Re: 450's
 
Originally Posted by ryan89crx
thats not common sense...

the stove has to be on first, if its off it wont burn you at all :1

haha owned faggot

claytonsmith 10-11-2006 07:20 PM
Re: 450's
 
Originally Posted by JDMFantasy2K

haha owned faggot
die :y


All times are GMT -5. The time now is 10:10 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands