38mm wastegate spring test?
i was wondering if anyone knew for sure how to test teh psi in my tial gate. i kid i bought it from said it is a 9psi. basically what i did to test it was use compressed air w/ a boost gauge in line and blow air slowly into it. it starts to open at 9 and is fully open at 12 so is this a 9lbs spring?
|
Re: 38mm wastegate spring test?
Right-O
|
Re: 38mm wastegate spring test?
No it's a 12 psi spring.
My WG spring test involves 3rd gear and burnouts. |
Re: 38mm wastegate spring test?
I did the same thing u did but why ---- around with a ----- 9-12psi spring? put 2 of those fuckers in their :y
http://img481.imageshack.us/img481/1425/1000300ys0.jpg Im not sure how close this will be but the WG starts too open at 22psi and fully open at 25psi, but ill find out on friday O0 |
Re: 38mm wastegate spring test?
I say it's a 25 psi spring.
Go do a burnout and tell us. |
Re: 38mm wastegate spring test?
Originally Posted by Minor Threat
I say it's a 25 psi spring.
Go do a burnout and tell us. |
Re: 38mm wastegate spring test?
Originally Posted by 88dx
I hope so Stock block LS FTW. Theirs one big spring and one smaller spring in their now :6
|
Re: 38mm wastegate spring test?
Originally Posted by Minor Threat
Awesome, weren't you building an LS/VTEC or something?
|
Re: 38mm wastegate spring test?
Originally Posted by 88dx
No im not building anything. This is a buddys car i just get to race it O0
|
Re: 38mm wastegate spring test?
seen a stock ls running 2? lbs ran 11s
|
All times are GMT -5. The time now is 05:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands