38mm external waste gate question
 

could anyone tell me or show me a website on how to connect the vacume hoses on this waste gate. its a tial style 38 mm wastegate. this is my third setup but my first time going with externall waste gate.i checked the search and google but had no luck.whats ------- me up is that it has 3 openings for vacumm and i just want to make sure i did it right

Re: 38mm external waste gate question
 

¿?

http://www.full-race.com/articles/tial_instructions.JPG

Re: 38mm external waste gate question
 

thanks for the diagram but im still a little confused cause i am using a boost controller and my turbo has a fitting that comes off of the compressor side . this is how im running mine and feel free to correct me if im wrong-i have a hose comming from the fitting off of the turbo into the bottom of the boost controller then from the top of the boost controller into the fitting on top of the wastegate, then i have a hose from the intake manifold to the fitting thats on the side of the waste gate.
turbo is a precision .48 .60
hallmark boost controller
tial style external waste gate

Re: 38mm external waste gate question
 

i think boost controller goes in "manual air regulator...."

Re: 38mm external waste gate question
 

vacuum goes to side fitting. use top fitting only with an ELECTRONIC boost controller