How much hp can these handle? I tried searching here but Kain's **** topic comes up and takes forever for me to load

 

Around 250 whp... just get 450cc injectors as it'll be easier to use an available base map for tuning.

 

I have dsm 450's in now (still all motor) and can't get them to run right at all. I never had them cleaned or anything so maybe I'll look into having that done, see my other thread about 450's + hack to see my problem if you want.

 

If you can get the 370's for a good price go for it. They will support a good amount of boost. The basemaps are not dependant on the size of the injectors. You just have to change the injector value and the program will correct the map for you. You will still have to tune it, but it will work with another base map.

 

I don't know what a good price is lol I'm gonna search around tonihgt. atm I can get accel (i think) 370's for 325 canadian or rc for 300 canadian then whatever I can get the guys to knock off that. So the 370s arent to cheap

 

Yeah that is not cheap. i was thinking like DSM 390's for like $20 or something. If you are gonna spend money, then get some RC 440's or the tunner toys ones.

The DSM 450's are like $40.

 

I already have dsm 450's, I'm gonna call around tomorrow and see how much to get them cleaned and all that.

 

what do you have controlling your injectors? you just cant throw in a set of 450's or 370's and hope its going to run right?.. You have to have something that will control the injector pulse (turboedit/uberdata etc) or map sensor signal (afc etc)

 

http://www.stealth316.com/2-air-fuel-flow.htm injector ----... very bottom of the page...

mark

 

donalson: thanks for the link

Abaz: v-afc, I put the stock injectors back in and it runs fine again. Going to have the injectors cleaned (hopefully if I can find somewhere to do it) and test em again.