Re: 300 and i'm happy, 350 and i'll shake some babies
 

when you port the d16z6 manifold to the spacer use it has your guide to port with then blend into the spacer

Re: 300 and i'm happy, 350 and i'll shake some babies
 

i have a turbine outlet flange for that turbo sitting in my tool box. it has a 3" opening for the downpipe and a threaded hole to thread a bolt in to keep the wg flapper shut for external gate so you dont ahve to weld it. 20 bux shipped if you want it.

Re: 300 and i'm happy, 350 and i'll shake some babies
 

pictures please

Re: 300 and i'm happy, 350 and i'll shake some babies
 

Episode 2: Transmission

Split the case in record time. And ---- you who ever used thread locker on every plug.
http://i91.photobucket.com/albums/k2...d/P1010169.jpg

This was easy to diagnose before tearing it down.
http://i91.photobucket.com/albums/k2...d/P1010172.jpg

Synchros look decent
http://i91.photobucket.com/albums/k2...d/P1010170.jpg

More synchros
http://i91.photobucket.com/albums/k2...d/P1010171.jpg

Aaaaaand didn't see this comming. I've got an extra set of shift forks in the attic. Just going to have to take two broke ones and make a good one again. Cast parts FTL
http://i91.photobucket.com/albums/k2...d/P1010173.jpg

Diff removal tools
http://i91.photobucket.com/albums/k2...d/P1010174.jpg


Gone to the dealer ship to get an ISB tomorrow. Gotta figure out how to remove the old outer race, and how to get the bearings off the carrier. Don't forget those tricky left hand threads on the FD kiddies.

Re: 300 and i'm happy, 350 and i'll shake some babies
 

pm me your email i get you a picture

Re: 300 and i'm happy, 350 and i'll shake some babies
 

Had to get creative to get the outer race out
http://i91.photobucket.com/albums/k2...d/P1010175.jpg

Diff bearing removal
http://i91.photobucket.com/albums/k2...d/P1010176.jpg

OBX vs Honda
http://i91.photobucket.com/albums/k2...d/P1010177.jpg

Side view
http://i91.photobucket.com/albums/k2...d/P1010178.jpg

And we have a winner
http://i91.photobucket.com/albums/k2...d/P1010179.jpg

Just one bolt was missthreaded/not threaded
http://i91.photobucket.com/albums/k2...d/P1010180.jpg

I'm going to run a tap in each one just to make sure. I'll be buying new bolts as well
http://i91.photobucket.com/albums/k2...d/P1010181.jpg

Big dot up, or big dot down?
http://i91.photobucket.com/albums/k2...d/P1010183.jpg

Evidently it doesn't matter
http://i91.photobucket.com/albums/k2...d/P1010184.jpg

The lid
http://i91.photobucket.com/albums/k2...d/P1010185.jpg

5 washers? I was thinking it was supposed to be 6. I'll be doing some searching to try to find what the deal is.
http://i91.photobucket.com/albums/k2...d/P1010186.jpg

Re: 300 and i'm happy, 350 and i'll shake some babies
 

Its six washers.

http://rbryant.freeshell.org/obx_washers.htm
https://www.homemadeturbo.com/forum/...?topic=80614.0

Re: 300 and i'm happy, 350 and i'll shake some babies
 

thanks for the link. i'm going to the hardware store today to check out what they have in stock. if i can't find anything, msc or something online i suppose. that guy is charging way too much for me

Re: 300 and i'm happy, 350 and i'll shake some babies
 

I konw Hes charging quite a bit, but I thought the write up would help you out. Make sure you check the runout on your obx.

Re: 300 and i'm happy, 350 and i'll shake some babies
 

yea, i don't have a dial indicator or magnetic base. maybe advance does with loan a tool

going to the hardware store right now to see about the spring washers and the extra SHCS i need. also going to the dealership to get a ISB