3" downpipe clearance (minime with hf adapter 14b turbo) **PICS***
i am nearing completion of my stockpile of parts i need to finish my minime b7/z6 boosted at 8 psi with a 14b, using a hf manifold and a weir racing adapter plate. i bought a prefabbed 3" downpipe...i was wondering if anyone with a similar setup had any clearance issues with the radiator fan/slave cylinder. thanks.
|
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
I told ya it would be tight if not fit!
Can you get a pic? |
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
whould have been better to fab it up yourself, so many things come into play when it comes to a downpipe, like the manifold, the turbo, which side it exits, with or without ac and ps
|
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
im still waiting on my exhaust housing, and my adapter plate. as soon as those get here, ill do a test fit, take pics, and post them up.
|
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
i have a 93 civic ex with a d15b, hf manifold, and a tdo4 turbo. i kept my ac and power steering. i had to make a downpipe cause i had no rom at all. it is very tight. if you dont have ac then you might be ok
|
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
See, that's why I had my DP fabbed up at the exhaust shop instead of buying one. I'm not harping on you just stating. LOL. Anyway, I have seen people cut the fan SHROUD to expose the fan a little but it allows some more room for that huge pipe. I didn't cut mine and run 2 1/4 right off then to 2.5 then 3 cat-back. I might cut it in a later build though. Understand?
JP |
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
you shoulda just used 2.5".
its just a 14b.... |
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
yeah. the only reason i bought the 3" is cause it was prefabbed and cheap and it had the cutout, and the d15(minime)z6 with a 14b is only temorary until i get the d16 built and i plan on using a big wheel 16g...so ill benefit from a 3" i think. im probably gonna run 2.5" exhaust for now, and upgrade once the engine is actually done, cause i dont know how long it will be.
got the 14b exhaust housing today, so i can probably get a rough idea without the adapter plate. |
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
I feel like this was overlooked.... its prefabbed... who's making prefabs that are designed for adapter plates and HF manifolds? You might alignment issues, let alone clearance issues.
|
Re: 3" downpipe clearance (minime with hf adapter 14b turbo)
Well the 3" is overkill for the 14b but if you plan on upgrading to a 16g down the road then it makes sense. You might have a hard time fitting the 3" DP on there. Here's a picture of my HF/Weir plate setup using a 2.5" DP
http://img311.imageshack.us/img311/8851/dp4ew.jpg As you can see there's not much room between the DP and the slave cylinder, maybe half an inch. To fix this, swap to an auto tranny ;) j/k. What you can do though if it won't fit is bang on the DP with a hammer where the bleeder for the slave cylinder would hit it and make a dent in the DP. Do this just enough so it fits. |
All times are GMT -5. The time now is 12:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands