2000 v6 mustang turbo build
#1
2000 v6 mustang turbo build
Hey everyone, my names Chris and I'm building up my v6 mustang for turbo. I realise this is mainly a honda website but I love the custom stuff going on here so I'm going to share mine. I've been visiting this site frequently getting ideas and checking out new turbo'd rides.
The plan is to keep it under 2,000$ at 10psi (later on I might build the motor for 12-15psi or higher, haven't decided yet)
2000 Ford Mustang 3.8L with a 5spd manual trans
Current mods:
3.73 gears/tloc - 350$
Cold air intake - 100$
Underdrive Pulley - 170$
Partial Exhaust - 200$
Dropped - 100$
Total: $920
I currently have MOST of the kit pieced together which includes:
t3/t4 69trim .63A/R Turbo - 200$
32x12x3 Front Mount Intercooler - 130$
Tial 38MM wastegate - 80$
3.6psi Spring - 40$ (Have the 8psi one too, came with WG)
SCT2 Tuner - 400$ (Bought from VMP Tuning, also going to buy the temp tunes from there)
1g DSM BOV (temp) - Free (may not be using at all)
Total: $850
Appearance:
Mach1 Grille Delete - 80$
03 Cobra front bumper, Fender, Fender Emblems and Paint - About 350$
Projector Headlights - 170$
Black Bumper inserts - 20$
Red neon lighting (interior) - 60$
Dual Gauge pod - 60$ (Buying cobalt gauges [boost and wideband o2]
Chicagoland Mustang Club stickers - 15$
Window Tint 20/5% - 200$
Moved back spoiler - free
Cut antenna - free
Tinted third brakelight - free
Total: $955
Soon I will be purchasing the following:
310lb Fuel Pump, Cobra MAF/Injectors, Electric Boost Controller. and all the necessary piping to fit it all together.
For the manifolds I'm going to make them from ground up.
I will try to keep you all updated as frequently as possible.
And here is a couple pics of the car
Thanks for checking it out.
The plan is to keep it under 2,000$ at 10psi (later on I might build the motor for 12-15psi or higher, haven't decided yet)
2000 Ford Mustang 3.8L with a 5spd manual trans
Current mods:
3.73 gears/tloc - 350$
Cold air intake - 100$
Underdrive Pulley - 170$
Partial Exhaust - 200$
Dropped - 100$
Total: $920
I currently have MOST of the kit pieced together which includes:
t3/t4 69trim .63A/R Turbo - 200$
32x12x3 Front Mount Intercooler - 130$
Tial 38MM wastegate - 80$
3.6psi Spring - 40$ (Have the 8psi one too, came with WG)
SCT2 Tuner - 400$ (Bought from VMP Tuning, also going to buy the temp tunes from there)
1g DSM BOV (temp) - Free (may not be using at all)
Total: $850
Appearance:
Mach1 Grille Delete - 80$
03 Cobra front bumper, Fender, Fender Emblems and Paint - About 350$
Projector Headlights - 170$
Black Bumper inserts - 20$
Red neon lighting (interior) - 60$
Dual Gauge pod - 60$ (Buying cobalt gauges [boost and wideband o2]
Chicagoland Mustang Club stickers - 15$
Window Tint 20/5% - 200$
Moved back spoiler - free
Cut antenna - free
Tinted third brakelight - free
Total: $955
Soon I will be purchasing the following:
310lb Fuel Pump, Cobra MAF/Injectors, Electric Boost Controller. and all the necessary piping to fit it all together.
For the manifolds I'm going to make them from ground up.
I will try to keep you all updated as frequently as possible.
And here is a couple pics of the car
Thanks for checking it out.
#5
Re: 2000 v6 mustang turbo build
Cool. I was reading and saw 69 trim and thought "WOW, that's a big inducer..." especially for a .63 turbine; which I think MAY limit your overall power output. That wheel is huge! Thank you for the pic. What turbo is it?
JP
JP
#6
Re: 2000 v6 mustang turbo build
I bought it on ebay, it's remanufactured. Spins freely, no shaftplay nothing..
It's got the dual fins as well
It's perfect for what I'm looking for since It's going to be a street car, not a trailer queen.
It's got the dual fins as well
It's perfect for what I'm looking for since It's going to be a street car, not a trailer queen.
#8
Re: 2000 v6 mustang turbo build
Originally Posted by Slacker
Where could I buy piping to finish the kit up?
hot and cold side?
hot and cold side?
Ace Stainless has some awesome prices.
Damn that sounded like a plug didnt it
Never mind.