2000 LS turbo manifold
I needed some re-asurance with my turbo project. We are turboing my friends 2000 integra. This is what we have: T3 turbo
Downpipe This is what we are going to buy. Let me know what you guys think (sudjestions)? Jonnyracecar Intercooler 255 walbro FMU custom turbo manifold (He wants to keep A/C & power steering) Boost controller RFL Bov (not sure) Blitz turbo timer 450 injectors (not sure if we need them) custom piping He wants to run as much boost as he can without doing internals. I told him to keep it below 10 psi. Comments! |
Re:2000 LS turbo manifold
ditch the fmu and get an afc to use with those 450s
|
Re:2000 LS turbo manifold
I was thinking of that. Do you know of a good place to buy one cheap.
Do you think he can run @ leat 8psi with that? Thanks! |
Re:2000 LS turbo manifold
aren't you supposed to build the downpipe after the turbo is installed? If you already have the downpipe your going to have to get a manifold that positions the turbo exactly how your downpipe needs it.
|
Re:2000 LS turbo manifold
What i meant was that we have a down pipe that matches the turbo we are using.
|
Re:2000 LS turbo manifold
Does your downpipe connect all the way to the cat or is it just a part of a downpipe.
What I was saying is every manifold doesn't position the turbo at the same angle. So if you get a manifold that positions the turbo at a different angle, then you won't be able to use 'your' particular downpipe. |
Re:2000 LS turbo manifold
Sorry! i meant to say that its only part of the down pipe
|
Re:2000 LS turbo manifold
looks good man.. just ditch the FMU for a AFC and the 450cc injectors. Everything else looks good. I'd stay below 10psi as well on a T3, but I'm sure the LS wouldnt mind be slammed with 10psi of boost though haha!
Originally Posted by TMonarky
I needed some re-asurance with my turbo project. We are turboing my friends 2000 integra. This is what we have: T3 turbo
Downpipe This is what we are going to buy. Let me know what you guys think (sudjestions)? Jonnyracecar Intercooler 255 walbro FMU custom turbo manifold (He wants to keep A/C & power steering) Boost controller RFL Bov (not sure) Blitz turbo timer 450 injectors (not sure if we need them) custom piping He wants to run as much boost as he can without doing internals. I told him to keep it below 10 psi. Comments! |
Re:2000 LS turbo manifold
Thanks! i will try to stay below 10PSI. ;)
Just one question. Do the 450cc just drop in? Thanks for the help! |
Re:2000 LS turbo manifold
check the tech FAQ's there is a complete installation guide made by Abaz
|
All times are GMT -5. The time now is 10:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands