14b stock psi?
what is the stock wastegate set at? 1g dsm 14b.thanks
|
Re: 14b stock psi?
8 psi,once in a while it creep to 9 or 10
|
Re: 14b stock psi?
mine holds 7.5psi rock steady.
|
Re: 14b stock psi?
hmmm. i know my friend chris has a 92 awd tsi and when he got it "stock" he was runing 11psi, but there were a few hacks done that came off dsmtuners.com i think.
also my cosuin has a 94 dsm and it was running 9psi, so idk, when my ls was running 1 stock boost was like 8-9. but who knows, internal wg can suck, but there not all that bad, i like external more thow, especialy because of them not boost spiking. |
Re: 14b stock psi?
Factory DSM had a solenoid to keep boost at 8psi when the motor is cold and 10psi when warmed up.
So in actual fact the wastegate is set at 8psi |
Re: 14b stock psi?
nice, i was worried that it was set at 11 psi which is more than i was looking for. waiting on my missing link and i will get to find out for sure.
|
Re: 14b stock psi?
Originally Posted by buddy4002
nice, i was worried that it was set at 11 psi which is more than i was looking for. waiting on my missing link and i will get to find out for sure.
|
Re: 14b stock psi?
what would you suggest, uberdata?
|
Re: 14b stock psi?
If your OBD1 yes.
|
Re: 14b stock psi?
You guys are all wrong.
It is a 9psi wastegate acuator. If your getting more or less your ------- something up. Could be a million things, too much boost = boost creep aka overrunning the amount of air you can flow through the internal wastegate. Too little boost = your wastegate flapper is getting blow open because you have a busted actuator, or you have shot journal bearings, ect... |
Re: 14b stock psi?
Originally Posted by Koby
your wastegate flapper is getting blow open because you have a busted actuator
The DSM 14b actuator/WG setups are a hokey hunk of ----, thats for damn sure. |
Re: 14b stock psi?
Originally Posted by FooK
Originally Posted by Koby
your wastegate flapper is getting blow open because you have a busted actuator
The DSM 14b actuator/WG setups are a hokey hunk of ----, thats for damn sure. |
Re: 14b stock psi?
tested it out today and gauge hit 10 and sometimes 11psi at full throttle. contacted the dude i bought the kit from and he sayed its a 16g wastegate. not good since i have a fmu/missing link/stock fuel pump. going to try the local turbo shop tommorow for lower wastegate. any good places to get one online?, looking for 6-8 psi.
|
Re: 14b stock psi?
TD05h (14b/16g/some 20g) actuators are all the same. 9psi. Trying to run lower boost is retarded, just trust me on htat.
|
All times are GMT -5. The time now is 06:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands