14b project cx
 

hey guys whats up? i just picked up a 14b with a nuespeed front mount, xs blow off vavle, and intercooling piping and all the return lines i kno i need dsm450cc injectors and a fmu. with this setup how do you guys think the car will perform i kno the turbo is small but im hoping that the car will be decent.

Re: 14b project cx
 

it will perform better if you dont use an FMU and use something like CROME or UBERDATA.
my 14b set up it pushing a little over 200hp at 12 psi

Re: 14b project cx
 

r u still running that little 8 valve cx motor? if your still running that tiny motor don't expect to have major gains, but it will be little quicker not to mention the low amount of boost you can run. but if you have upgraded to the 16 valve d15 or d16 then thats a different story. def. get rid of the fmu, that was the first thing i did and i wish i would have went with a chipped ecu earlier, there is so much more you can do. good luck on the setup ;)

Re: 14b project cx
 

nah no 8 vavle it has a d15b7 motor with the cx tranny the longer gearsso im hoping that will help it out yea i guess im gonna go with the ecu then everone is telling me hell with the fmu thanks alot