14b outlet...
 

K I got a 14b with the compressor outlet pipe from Dejontool.com.
However I was wondering what you use for the 1st bend since it points up? I know in the tech section they use radiator hosing but I was wondering is there a less ghetto way? I also purchased a 90 degree rubber hose thing from Home Depot (plumbing dept.). Would this hold up? Or will it melt?
Heres a shitty pic (sorry its big)
http://www.we-todd-did-racing.com/we...ZmQzMXk1NDE%3D
On the bottom connected to the piping. Thx.

Re:14b outlet...
 

I'm using radiator hose. Im just gonna go and have a pipe made like that thats bent the way I need it so I dont have the crazy piping off the compressor.

Re:14b outlet...
 

That hose will work just fine :)

Re:14b outlet...
 

FYI I use a 14b, but used the outlet from a Turbo Mirage (4G61). The difference is this outlet curves TOWARDS the radiator area making plumbing about 69x easier IMO.

Re:14b outlet...
 

where can you find a mirage turbo outlet pipe?

Re:14b outlet...
 

oooo I gotta look for one of those. Great info! Any pics by any chance?
what turbo is on the 4G61 btw?

Re:14b outlet...
 

My digital camera is hosed, but soon as I can borrow a friends (next couple days) I'll post it up. In the meantime I found the following pictures:

This is a 4G61T Mirage with an 11B, notice the outlet pointing UP?

http://us.f1.yahoofs.com/users/f2018...jVqn_AIhI1UF.Z

This is a 1991 Eagle Talon w/14B, notice the outlet pointing DOWN? Since we have to swap sides w/turbine / compressor housings you can see why the Mirage outlet is bettah:

http://www.mooresmopars.com/images/jpg/talon-engine.jpg

Re:14b outlet...
 

I got mine from a Mirage owner who upgraded to a bigger turbo and outlet on www.4g61t.com

Re:14b outlet...
 

---- it, my turbo got clocked. spring for a wastegate acutator ;)