Re: 14B MAX RPM boosting???
I unplugged my wastegate and It failed to boost like I thought a open wastegate should. the spool time was
awful and the PSI dropped of a pound or two then with my mbc. Cold the problem be that My wastegate is a piece of ----? Is it possible that air is leaking past the flapper and thats why I'm the seeing these results? I think that I am going to try and put some washers between the base of the wastegate and the compressor house to pull the rod tighter and see what happens. :S :S :S :S :S :S :S |
Re: 14B MAX RPM boosting???
It's the fookin wastegate. I put three washers to one side under the wastegate to space it out and just tightened that one side down and it boosted uber fast. Then I knew I was on the right track then, so i took and tried to put 1 washer
per side but after making a couple of passes that mfer was hot as ---- so I was only able to get on 1 washer. The results were that I ended up plugging the wastegate back into the compressor housing and it is producing as follows. 1st--------6-7 PSI to infinity rpm now! 2nd ------6-7 3rd--------7-8 4th--------7-8 5th--------8-9. Finally it's carring the RPMs to past 5k and to redline like it should. Haluah!!!!!!!!!!!!!!!!!!!!!!!!!!!!! What a pain in my ass but at least I found out wtf was going on. Thanks guys for all of the brainstorming Ideas!!!! |
Re: 14B MAX RPM boosting???
Originally Posted by QikEnuF
You are running the compressor out of its efficiency range.. Go bigger
|
All times are GMT -5. The time now is 10:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands