14B -> HF mani ??????
 

Ok so I bought one of weirracing adpater plates for my setup. Well the bolts he told me to use dont fit. Has anyone else run into this problem? What did you do? I am thinkin I just need to go and get different bolts, but I bought the size he said. I am lost on thoughts of what to do. Someone help me please.

Re: 14B -> HF mani ??????
 

WOW man. Calm down. Take the flange to Autozone or Homedepot and get some that fit
Be creative

Re: 14B -> HF mani ??????
 

im sure they fit just you dont know what your doing with them

Re: 14B -> HF mani ??????
 

ur car's pretty nice, i'd hate to see it sit with a blown motor after u turbo it =x

Re: 14B -> HF mani ??????
 

I plan on selling shortly afterwards. I want a 99 SI.

Re: 14B -> HF mani ??????
 

i havent bought all the bolts yet.. but what bolts did he tell you to buy???
these are the ones i arron told me to get..

1- M10x1.25mm thread pitch x 25mm long socket head cap screw
3- M8x1.25mm thread pitch x 35mm long set screws
3- M8 nuts
3- M8 lock washers
4- 3/8"-16UNC x 1" long socket head cap screws


so far i got
4- 3/8"-16UNC x 1" long socket head cap screws

'LOL..

anyway yea.. i got thos from advanced..
the other ones im gonna order from mcmaster i think ..

but if thos aint right im not gonna buy em..

cause that m10 bolt i couldnt find or the other ones.. i think they had the nuts tho..


anyay let me know what bolts u got and whats not working..

the 4 bolts i got so far that go from the mani to the plate fit..

which ones are giving you problems?

Re: 14B -> HF mani ??????
 

I got the same bolts, I got all mine at Lowe's. The only one they didnt have was the M10x1.25, I got a M8x1.25 for that one

Re: 14B -> HF mani ??????
 

so which ones aint working >??

Re: 14B -> HF mani ??????
 

.

Re: 14B -> HF mani ??????
 

.

Re: 14B -> HF mani ??????
 

those are all the right blots its not rocket science just take a good look at it

Re: 14B -> HF mani ??????
 

Thanks jackass!!

I see why I was having trouble now, I bought the wrong screws. I need to get ones without heads on them!!! DAAH! Thanks again everyone who gave me positive help!

Re: 14B -> HF mani ??????
 

I have also recently bought this adaptor for my project and Ive been searching all over for the bolts. The ones I am having trouble finding are:

1- M10x1.25mm thread pitch x 25mm long socket head cap screw
3- M8x1.25mm thread pitch x 35mm long set screws

these seem to not be very common at hardware stores, autoparts stores. And everywhere online thats had them seems to sell only by the box. where have you guys found these or ordered these from??

Re: 14B -> HF mani ??????
 

I ended up buying the M8x1.25x35mm at Rural King( like a tractor supply/farm & fleet). I threaded them into the adapter plater with nuts on them, and then cut the heads off. The reason I put the nut on there was to straighten the threads back out so I could thread them back on once I put the turbo against the adapter plate. The M10x1.25x25mm I stole from Rural King cause all they had was one on a display. On this bolt I cut the head off of it, and welded one of the socket head screw heads on it. It works perfect!!! The only probelm I have run into is that I need to cut one of the bolts shorter than the others, but you can figure this out once you have them all threaded and the turbo against it.

Re: 14B -> HF mani ??????
 

"set screws" have no heads

Re: 14B -> HF mani ??????
 

NO ----!!! I didnt buy set screws cause they didnt have them long enough. So I bought BOLTS! Use some thinking power and you could figure that out!