11 psi will this be bad
03-20-2004, 10:07 AM
#1
1.0 BAR
Thread Starter
Join Date: Nov 2003
Posts: 424
11 psi will this be bad
ok so im running 11 psi ;i dont hear any detonation ;my air/fuel gauge is reading all the way rich at WOT ;fuel management is ghettodyne ;so i was wondering if this is to much pressure for a stock d16a6 with ARP head studs ;i dont plan on running 11 psi all of the time ;just at the track
03-20-2004, 10:10 AM
#3
Guest
Posts: n/a
Re:11 psi will this be bad
sounds like it might hold but its really up to the motor. my d16a6 spikes to 11psi in third and forth gear sometimes and i havent had problems. just play it safe and always have the car runnning with good oil, premium gas, timing set correctly and all that good stuff.
03-20-2004, 10:19 AM
#5
1.0 BAR
Thread Starter
Join Date: Nov 2003
Posts: 424
Re:11 psi will this be bad
yea mine spikes to 11 in the same gears; but then it goes to 10 ;i run 92 octane ;i ate up a mustang gt last night ;his excuse was my oil light was on and traction probs ;he dont have traction probs like me 
03-20-2004, 11:13 AM
#6
1.0 BAR
Join Date: Jul 2003
Posts: 580
Re:11 psi will this be bad
nice kill. its always great to say his 4.6l got beat by a 1599cc. yeah just keep it well maintained with good gas check the plugs every week or so, and what I hear, all the high horsepower guys check the oil before they leave the house
03-21-2004, 07:55 AM
#8
1.0 BAR
Join Date: Jan 2004
Posts: 255
Re:11 psi will this be bad
I think 11PSI is kinda close to the limits of the honda MAP sensor. I'm pretty sure someone got a ghettodyne map with my boost cut code in it - this would be a good idea to save your motor from over-boosting.
-Michael
-Michael
Thread
Thread Starter
Forum
Replies
Last Post
d15bsnail
Forced Induction
31
09-06-2005 02:48 PM
berettagtz117
Wanted
3
08-20-2005 10:06 AM
jockobo
Forced Induction
9
03-25-2003 08:57 PM
