02 wrx turbo on d16?
I have a question from an earlier post of mine- will a stock 02 wrx turbo do well on a d16y7?
|
Re: 02 wrx turbo on d16?
Well if they put it on the 2.0 wrx motor and it pulls on that most likely it will pull on your 1.6.
|
Re: 02 wrx turbo on d16?
I'm sure it would work. But if I remember correctly, the WRX turbo has kind of a funky turbine housing, which would make it a pain in the ass to work with.
Some times finding the weird fittings and flanges is time consuming and costly... |
Re: 02 wrx turbo on d16?
what im asking is, is too big, will it create tons of lag- or is it a good size all that kinda ---- smart ass- I dont know alot, and Im just trying to learn what is what ok
|
Re: 02 wrx turbo on d16?
ok thanx - just wondering cause a buddy of mine is trying to sell his- he's going bigger and doesnt need it
|
Re: 02 wrx turbo on d16?
i think it is a tdo4-13g...its pretty small...i think it works so well on the wrx since it runs like 12 psi stock...and plus it doesnt rev as high as a d so it probably will not pull all the way to redline
|
Re: 02 wrx turbo on d16?
Originally Posted by chanceb18
what im asking is, is too big, will it create tons of lag- or is it a good size all that kinda ---- smart ass- I dont know alot, and Im just trying to learn what is what ok
Just saying, if it work on a 2.0, it should be fine for something slighty smaller Just like the eclispe t25/28? |
Re: 02 wrx turbo on d16?
wrx turbos are pretty small
they might come on a bigger engine, but they spool up and die off REAL fookin fast. I think it would be a pretty good mate for astock d16 |
Re: 02 wrx turbo on d16?
i like it on mine...
193whp 187wtq. that's street tune w/o any timing tuning on the dyno. there's still more power to be had. i'm moving to a .48/.60 t3 though for more topend. it is fun though...quick spool and fully spooled at 3-3.5k rpm. |
Re: 02 wrx turbo on d16?
Originally Posted by scttydb411
i like it on mine...
193whp 187wtq. that's street tune w/o any timing tuning on the dyno. there's still more power to be had. i'm moving to a .48/.60 t3 though for more topend. it is fun though...quick spool and fully spooled at 3-3.5k rpm. |
All times are GMT -5. The time now is 06:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands