HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   02' WRX TD04-15g turbo (https://www.homemadeturbo.com/forced-induction-7/02-wrx-td04-15g-turbo-21679/)

Slow-Si 06-08-2004 01:58 PM

02' WRX TD04-15g turbo
 
Has anybody tried using this turbo on their custom set-up? I'm asking because I compared my turbo (WRX 15g) to my friends 15g off the Greddy kit and the two don't look the same at all. It looks as if I might have some mounting problems. Can anybody shed some light?

davcivic 06-08-2004 02:08 PM

Re:02' WRX TD04-15g turbo
 
The flanges are different, and I believe the WRX turbo is also smaller. I have a 2002 WRX but I have never seen in person the 15g from the greddy kit. The flange on the wrx is triangular, like all other subaru turbos, with three bolts, the greddy kit has a 4 bolt flange. The downpipe might fit.

honda_joe 06-09-2004 11:46 AM

Re:02' WRX TD04-15g turbo
 
I believe its a 13G instead of a 15g on the Greddy kits.

crxrx7 06-09-2004 02:13 PM

Re:02' WRX TD04-15g turbo
 
that would make sense if it is smaller.

Slow-Si 06-09-2004 05:09 PM

Re:02' WRX TD04-15g turbo
 
Nope, both the Greddy and the 02' WRX use a 15g turbo. And this being true, I'm assuming the output of the 2 turbo's are similar, however I believe the wastegate on the WRX 15g is set at 10-11 psi.

djfob 06-09-2004 08:20 PM

Re:02' WRX TD04-15g turbo
 
I'm pretty sure the wrx turbo is a 13T. I'm gonna be using one and 89dxhunchback is currently using one on his D. It's kinda hard to work with(hard to clock) and I had to get a custom flange made for my mani.

scttydb411 06-10-2004 10:47 PM

Re:02' WRX TD04-15g turbo
 
wastegate actuator is 8psi. if you want more just use a boost controller (wrx uses an elec solinoid to up the boost) mbc will work fine. even though it's a td04, it is ever so slightly smaller than the greddy and does use the 3 bolt ihi flange for the inlet and a 5 bolt ihi for the outlet/downpipe. you can get the flanges from www.uniquemotorsports.com to make your adapterplate and downpipe. it's good to about 15psi. i've been using one for over a year and at 12psi for almost a year. good turbo if you're willing to make an adapterplate, clock it, and make an extension or custom mount for the actuator.

Slow-Si 06-11-2004 12:28 AM

Re:02' WRX TD04-15g turbo
 
scttydb411: how are u liking the setup? When do u hit full boost? Ideally I want a turbo set-up that DOESN'T hit full boost until 3000rpm to make it easier for city driving, but it seems kinda far fetched on a small turbo like the wrx td04. Anyways, can u also get into more detail on your set-up, specifically the manifold. thanx

scttydb411 06-12-2004 02:35 PM

Re:02' WRX TD04-15g turbo
 
i hit full boost at 3-3.5k rpm...love the setup. check the link in my sig for my page on my car...haven't updated it since i went uberdata.

Slow-Si 06-13-2004 11:07 AM

Re:02' WRX TD04-15g turbo
 
Nice set-up. what kinda numbers are u running now with uberdata? and how much did u pay for your turbo? I paid about $150US for mine which i think is a good price.


All times are GMT -5. The time now is 09:01 PM.


© 2024 MH Sub I, LLC dba Internet Brands