T3 Discharge Flange
searched everywhere. where can i find a T3 discharge flange that will work with a internally gated t3 where the flapper would clear.
|
Re: T3 Discharge Flange
Usually the flapper is in the 5-bolt exhaust housing for a T3.
http://www.maxspeed-motorsports.com/maximages/t35.jpg Which T3 are you using? |
Re: T3 Discharge Flange
don't have a picture host but it can be explained better if i could post some. you got PM whiterice
|
Re: T3 Discharge Flange
found it, thanks for the help whiterice. i was lookiing for that piece you posted up but without the flapper on it.
|
Re: T3 Discharge Flange
Originally Posted by symetrikgene
found it, thanks for the help whiterice. i was lookiing for that piece you posted up but without the flapper on it.
ill remove the flapper and weld it shut where it was if you want one |
Re: T3 Discharge Flange
you can buy one of those T3 outlet flange that covers up the WG hole.
|
Re: T3 Discharge Flange
Originally Posted by Donald125
you can buy one of those T3 outlet flange that covers up the WG hole.
Originally Posted by lopsided genetics
where can i find a T3 discharge flange that will work with a internally gated t3 where the flapper would clear.
|
Re: T3 Discharge Flange
Originally Posted by c0mpl3x
donald, reading > you
|
Re: T3 Discharge Flange
I think he might have been referring to the odd ball t3 that has the flapper built in to the turbine housing.
I have only come across one of those which I sold quick. A regular block off plate does not have the room to allow the swing arm to rotate. you could use a stock piece like the picture, cut off the arm and weld the small hole on the side. |
Re: T3 Discharge Flange
I can laser cut the flange if you have a gasket I can measure.
|
All times are GMT -5. The time now is 09:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands