Starting my own Fab shop.
 

My first client is my dads car. It is a 1987 El Camino with a LS1 swap from a 2004 GTO in it and it also has all of the GTO dash and interior.
https://www.homemadeturbo.com/attach...ine=1326834537
http://i565.photobucket.com/albums/s...t/bc1d7861.jpg
https://www.homemadeturbo.com/attach...ine=1326834537

I started with the used Borla mufflers and tips that were cut off the GTOs exhaust and some stainless tubing from ACE stainless.
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537

Than started to mock up.
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537

Finish welded and polished.
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537

Installed
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537

After driving it all summer we got it back in the garage to put the H pipe in and v-band clamps.
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537
https://www.homemadeturbo.com/attach...ine=1326834537

tough business to start but good luck. very nice work......

Thanks. I am acually just doing it out of my garage on my free time, but hope one day to do it as a full time job.

I did a exhaust for a 2000 civic SI over the weekend.

https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641

He brought me a used muffler and resonator that I polished up.

https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641

I reused some of his old tubing to save him some money and just put the resonator in the middle. I did the rear section out of stainless and polished it all up.

https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641
https://www.homemadeturbo.com/attach...ine=1327432641

Looks nice!! what did you use to polish the old parts and bring them back to life like that? If you dont mind me asking.

Brandon

That is really beautiful, I really like the interior change. That's a classy ride! I can tell that you just don't throw things together.

Thanks, I start with 400 sandpaper then 800,1200,and 2000 grit. Then I use this bad boy!!!

https://www.homemadeturbo.com/attach...ine=1329336134
It has a 2HP motor on it!

Here is a rollcage that I did for a all motor CRX.

https://www.homemadeturbo.com/attach...ine=1329338545
https://www.homemadeturbo.com/attach...ine=1329338545
https://www.homemadeturbo.com/attach...ine=1329338545
https://www.homemadeturbo.com/attach...ine=1329338545
https://www.homemadeturbo.com/attach...ine=1329338545
https://www.homemadeturbo.com/attach...ine=1329338545
https://www.homemadeturbo.com/attach...ine=1329338545
https://www.homemadeturbo.com/attach...ine=1329338545
https://www.homemadeturbo.com/attach...ine=1329338545

Nice work. Looks like clean weld lines all the way around. Good luck with the business.

Awesome work!!! I am looking into doing ths part time myself. Bought a Miller Dynasty 200DX tig last year. Have two drill presses, Chop saw and other tools. I am a union sheet metal worker for a living but with this economy the way it is. I need to start honing my skills and making some side money. Really hoping to score a used cold cut saw and a new or newer mig welder this year too. Time will tell though. Good luck with everything.

Brandon