Project Turbo 6 cylinder Volvo Wagon
5 Attachment(s)
I got a little break between customer jobs and managed to get started on the new header for my own car. I built a manifold for it for a Holset Hy35 and it kinda sucked. 6-into-1 innto a T3 flange. :P
So the new one is a twin scroll T4 setup. Pretty rough yet obviously, but I like the layout so far. Attachment 12810 Attachment 12811 Attachment 12812 Attachment 12813 Attachment 12814 |
Re: New Manifold for my Own Car
Looks cool... dose fireing order take part in the design, or is i just the first three go to one colector, and the other three go to another??
|
Re: New Manifold for my Own Car
Ya exactly right, firing order is a big part of it for twin scroll. Luckily, 6 cylinders do not have the "awkward" pairing that most 4 cylinders do (having to pair 1-4 and 2-3 in most cases). The correctly pairing is actually 1-2-3 and 4-5-6. So that is convenient, 6 cylinders and twin scrolls are a match made in heaven.
|
Re: New Manifold for my Own Car
getting in to see this. i have an E36 M3 that i am interested in boosting eventually.
what engine is that. looks toyotaish, but im not very familiar with anything but honda and bimmer. i used to work at nissan, but we never saw any inline 6 stuff |
Re: New Manifold for my Own Car
pretty sure thats a nissan, they always got that cam advance thing on the gear
|
Re: New Manifold for my Own Car
nissans have the intake and exhaust on the other sides
i am thinking older toyota, maybe early 80's?? |
Re: New Manifold for my Own Car
fwd volvo engine mounted rwd?
|
Re: New Manifold for my Own Car
fwd inline 6? never heard of it
|
Re: New Manifold for my Own Car
|
Re: New Manifold for my Own Car
Ya rawr is right - it is a Volvo S80 T6 engine (FWD, twin turbo, 24v, 2.8L inline 6) turned 90 degrees and stuffed in an '83 volvo 240 wagon. Narrowed 31 spline posi Ford 8.8 rear end, widcened 7.5" in the back with 285/40 18's on Work VS-XX.
http://www.pbase.com/capnbondo/image/90754891/large.jpg http://www.pbase.com/capnbondo/image/90754896/large.jpg The first version of the motor I am only aiming for 400whp. With rods and a tremec trans "version 2" will be around 600whp. Version 3 will be the worlds first volvo wagon capable of entering into orbit aorund the earth. :P O0 ;D |
All times are GMT -5. The time now is 04:40 PM. |
© 2024 MH Sub I, LLC dba Internet Brands