oil feed fitting

Reply Subscribe

Thread Tools

Search this Thread

Oct 23, 2007 | 08:57 PM

fritt

Thread Starter

0.0 BAR

Joined: Oct 2005

Posts: 16

oil feed fitting

hey guys i just wanted to show you the oil fitting that goes into the back of the block for my oil feed line that i made out of an old oil pressure sensor and a nut. Do you guys think it will work allright

Name: Picture074-2.jpg
Views: 24
Size: 70.5 KB

Name: Picture071-1.jpg
Views: 27
Size: 66.1 KB

sorry for the crappy pics my camera sucks

Oct 23, 2007 | 09:04 PM

CRXDrew

1.5 BAR

Joined: Oct 2004

Posts: 892

Re: oil feed fitting

jesus... i guess it'll work but sometimes its worth a few bucks to just get a nice brass / steel fitting.

HMT worthy for sure however

Oct 24, 2007 | 03:58 PM

TunerToys

Guest

Joined: Dec 2002

Posts: 1,463

Re: oil feed fitting

That's some solid Homemade action there.

Craig

Oct 24, 2007 | 04:13 PM

michigan_soler

1.0 BAR

Joined: Aug 2005

Posts: 334

Re: oil feed fitting

if it doesn't leak, rock it!

hmt ftw

Oct 24, 2007 | 04:40 PM

SpankedYA!

0.0 BAR

Joined: Mar 2004

Posts: 0

Re: oil feed fitting

Is it welded or JB welded? I can't tell by the pics. If its JB welded its not going to hold for long and you will contacting Tuner Toys shortly!

Oct 24, 2007 | 04:59 PM

ghettoturbo

Guest

Posts: n/a

Re: oil feed fitting

did you make the hole in the sender bigger so it will flow enough? I assume you did since you obviously drilled it out when you welded the nut on the back

Oct 24, 2007 | 05:12 PM

klyph

1.5 BAR

Joined: May 2007

Posts: 749

Re: oil feed fitting

lol, ur such a cheapass jew.

nice work and omg sweet manifold :1

Oct 24, 2007 | 08:53 PM

fritt

Thread Starter

0.0 BAR

Joined: Oct 2005

Posts: 16

Re: oil feed fitting

yeah i know this is very getto but i want to get my da boosted this weekend and i dont want to wait another week or 2 for a fitting to arrive and no its not jb welded i just used a mig at my work and it doesnt have any leaks