NOOB needs help, I posted PORNZ
01-04-2008, 06:46 PM
#1
0.0 BAR
Thread Starter
Join Date: Dec 2006
Posts: 24
NOOB needs help, I posted PORNZ
WELL THERES THE ****, AND HERES THE QUESTION........ PLEASE DON'T GET ANY *** ON MY THREAD LOL'S
OK, THE SHOP THAT WAS REBUILDING MY TURBO CALLED, AND SAID THERE IS A HAIRLINE CRACK ON THE EXHAUST SIDE OF THE TURBO. I HAVE A BUDDY THAT'S A WELDER, BUT HE SAYS THERE ARE DIFFRENT RODS THAT YOU USE TO WELD CAST IRON. AT LEAST THATS WHAT I THINK THE EXHAUST SIDE OF THE TURBO IS MADE OUT OF. WELL I KNOW YOU GUYS WELD ALOT OF ----; WHAT WOULD BE THE BEST ROD TO USE?
01-04-2008, 06:47 PM
#2
3.0 BAR
Join Date: Feb 2006
Posts: 3,906
Re: NOOB needs help, I posted PORNZ
u need a high nicle rod(ni-rod)
but realy if its cracked its gonna kep going
but realy if its cracked its gonna kep going
01-04-2008, 06:49 PM
#3
0.0 BAR
Thread Starter
Join Date: Dec 2006
Posts: 24
Re: NOOB needs help, I posted PORNZ
WELL ITS ONLY AN INCH, I'M JUST GONNA GRIND A CANAL AND FILL IT WITH A WELD SEAM, AND THEN GRIND ALL THAT DOWN, I'M GETTING THE TURBO BACK AT 6PM I'LL POST PICS RIGHT THEN. I HEARD IF YOU USE RODS, THE HEAT WILL MAKE IT EXPAND, AND ITS GOING TO MESS UP OR SOMETHING ALLONG THAT LINE.
01-04-2008, 09:48 PM
#4
0.5 BAR
Join Date: Jul 2007
Posts: 155
Re: NOOB needs help, I posted PORNZ
its called caps lock,
also you suck at the interwebz, buy a new turbo
also you suck at the interwebz, buy a new turbo
01-04-2008, 09:55 PM
#5
3.0 BAR
Join Date: Feb 2006
Posts: 3,906
Re: NOOB needs help, I posted PORNZ
get a new housing, filling it wont matter
01-04-2008, 10:16 PM
#6
Guest
Posts: n/a
Re: NOOB needs help, I posted PORNZ
I'll fix your turbo if you TURN OFF YOUR ------- CAPS LOCK
01-04-2008, 10:25 PM
#7
3.0 BAR
Join Date: May 2005
Posts: 1,811
Re: NOOB needs help, I posted PORNZ
your **** is red X'd bitch.
high nickle rod, but it is alot of effort to weld cast iron. It takes pre-heat and post heat and to stress relieve it you weld alittlebit, weld somewhere else then peen it, repeate
high nickle rod, but it is alot of effort to weld cast iron. It takes pre-heat and post heat and to stress relieve it you weld alittlebit, weld somewhere else then peen it, repeate
01-05-2008, 09:03 AM
#8
0.0 BAR
Join Date: Mar 2004
Posts: 0
Re: NOOB needs help, I posted PORNZ
This post sucks.
01-05-2008, 07:20 PM
#9
0.0 BAR
Join Date: Oct 2003
Posts: 0
Re: NOOB needs help, I posted PORNZ
Originally Posted by CSaddict
This post sucks.
01-05-2008, 07:36 PM
#10
1.5 BAR
Join Date: May 2007
Posts: 749
Re: NOOB needs help, I posted PORNZ
Just a hairline? Bitch, run that ---- 'til it falls off.
