my custom intake manifold is FINISHED :)
 

hell yeah, my GTI is one step closer to being finished ;D


http://home.comcast.net/~turbohf/mani012.JPG
http://home.comcast.net/~turbohf/mani010.JPG
http://home.comcast.net/~turbohf/mani011.JPG
http://home.comcast.net/~turbohf/mani007.JPG
http://home.comcast.net/~turbohf/mani008.JPG
http://home.comcast.net/~turbohf/mani009.JPG
http://home.comcast.net/~turbohf/mani014.JPG


manifold is custom fabbed by Aaron @ Euro Nation Motorsport from T6 aluminium. fuel rail from a "225hp" 1.8t Audi TT, 60 lbs Seimen Deka injectors (in G60 injector cups), and a ~70mm VR6 throttle body.... also this manifold is for a 16 valve head....

anyway just thought i would share :-*

Re: my custom intake manifold is FINISHED :)
 

All you need now is a Euro haircut.

Use a number 5 gaurd and then just gel it and comb it forward, homo. VW sucks.

Re: my custom intake manifold is FINISHED :)
 

ROFL

Re: my custom intake manifold is FINISHED :)
 

dont make fun of him u fukin noob, his vw will own your ass, i bet u drive a for tempo with wal mart spinners and ----, and u come in here making fun of a guy thats been in here for years... your a dumb ----------er, dont go ---- talken, he was just showing his new parts, he could give a ---- less if u like or dont like his car, now go jump off a bridge u noob

Re: my custom intake manifold is FINISHED :)
 

looks good, only think id change is the end of the tank, I would probably have bulged it out on the end so the air doesnt ram straigt into a flat wall. Is it just painted with a sticker on it or what?

Re: my custom intake manifold is FINISHED :)
 

yeah its painted flat black with the company sticker...

Re: my custom intake manifold is FINISHED :)
 

nice. my cuz is starting his build on his 92 wulfsberg gti. gonna be a killer track car :) whats cost been for you on what you've done so far? he's got about 2 grand to drop into it and track it out, should turn out nicely

Re: my custom intake manifold is FINISHED :)
 

i wish i had welding skills like that... looks good though

Re: my custom intake manifold is FINISHED :)
 

Damn that ---- is nice and pretty. Great work.

Re: my custom intake manifold is FINISHED :)
 

looks good, but i would have left it unpainted.

Re: my custom intake manifold is FINISHED :)
 

thats because youre hardcore hahaha :P

Re: my custom intake manifold is FINISHED :)
 

----, looks nice man, good job

Re: my custom intake manifold is FINISHED :)
 

hey aaron, you sell intake mani's yet?

Re: my custom intake manifold is FINISHED :)
 

i think it looks sweet

Re: my custom intake manifold is FINISHED :)
 

.

Re: my custom intake manifold is FINISHED :)
 

well keep us up to date, cuz you make some baddass ----, and ima buy one o thems up haha

Re: my custom intake manifold is FINISHED :)
 

i have a question.

whats the Difference if you made it like This
http://www.sdsefi.com/223man.jpg

rather than like you have it??

as per this websight http://www.sdsefi.com/techinta.htm and many many other i see that use this design.

Re: my custom intake manifold is FINISHED :)
 

looks good dude. 70mm TB? hot dam.

So whats left to complete the car?

Re: my custom intake manifold is FINISHED :)
 

how long have you been working on this engine dustin??
i know Dub prjects usually take a lot longer than most, but damn, i got you some parts 3-4 months ago

Re: my custom intake manifold is FINISHED :)
 

The difference would be a couple things. Running the stacks into the plenum would actually provide a little bit more flow since air likes to be drawn from the center of the plenum instead of the walls. Although not many people have tinkered too much with the scientific side of forcing air in of turbocharging instead of the drawing air through of N/A.

It also would have allowed me to make the runners 1+ inch longer which would move the opperative range of the runner length about 1000rpm down (tuning the runners a little better).

I'm going to make another one with velocity stacks for Dustin's car later but right now we're running short on time so I threw this one together.

As far as the round encap, I didn't really have the means to make one, so I didn't. Perhaps later.

http://img156.echo.cx/img156/5046/untitled25wo.jpg
- vs -
http://img198.echo.cx/img198/7875/cu...tors3qc8kx.png

Re: my custom intake manifold is FINISHED :)
 

nice man, can't wait to see the end product...I haven't had time in a month or two to get back to working on my GTI :-\

Re: my custom intake manifold is FINISHED :)
 

Very sexy man.

Re: my custom intake manifold is FINISHED :)
 

engine needs wired up, head was bolted down this morning along with the timing belt. needs a right rear brake line cuz i have know idea where the ---- it went, along with the bolts that hold the parking brake (aka burnout) cables. also waiting on my head flange and V-band flange/clamp to get here *coughjoshcough* excuse me..... rollbar and charge pipes need fabbed, turbo manifold needs a WG flange on it... oh and we need to figure out the cooling system..

this setup is a little odd so we need to figure out how the upper radiator hose and heater hoses are going to go (probly need a custom upper water neck)...------ never ending...


well i think i got the car last september.... the parts i got from you where like 1 of 10 other orders not to mention other small misc things... btw can you see if you can get me this: N0177643 and im willing to wait a little while for it to get here too (will make sence when you look it up ;))... lmk whats up with it...

Re: my custom intake manifold is FINISHED :)
 

lets see some pics when the project is done, or progress pivs of it, what are your goals and sutch for it?

Re: my custom intake manifold is FINISHED :)
 

i'l check it out at work in the morning, without having ETKA infront of me right now , i know its head/fog light bulb, its not a 9000 series bulb, i dont think its a gas discharge bulb. so, i'm gonna take a guess and say its a yellow H4 bulb

Re: my custom intake manifold is FINISHED :)
 

ha i knew hotrex would screw something up for you.

Re: my custom intake manifold is FINISHED :)
 

8) yeah yellow H4.... i did a check and there was only one dealer in the country that has one (well 3) those assholes want 26bucks EACH....---- that list is like 12.....

Re: my custom intake manifold is FINISHED :)
 

i just checked the warehouses, i can get you 23 of them by thursday and 105 more next week O0
and list is 16.22 ,but paypal me 11.50ea and a couple dollars shipping just to cover my cost

Re: my custom intake manifold is FINISHED :)
 

oh your right it did say 16.22... well as soon as my paypal has a couple bucks in it i will buy a couple sets....

Re: my custom intake manifold is FINISHED :)
 

just let me know so i can order them

Re: my custom intake manifold is FINISHED :)
 

cool ya i have a 82 vw rabbit ls diesel non turbo 1.6 runs on french fry oil so ya and it slooooooooooooooooooooowwww

Re: my custom intake manifold is FINISHED :)
 

awesome work I'll have this thread bookmarked! Dumb question Thats TIG welded right?

Re: my custom intake manifold is FINISHED :)
 

yeah it is a dumb question ::) lol yeah all TIG welded...think Aaron forgot how to use the MIG or doesnt remember where it is ;) everything was TIGed on that car...

Re: my custom intake manifold is FINISHED :)
 

Hold on I have to go Euro-nate.............
K, I'm back. Looks really nice man!
;D

Seriously, nice job!