Motor Mount Fab
#11
Re: Motor Mount Fab
Originally Posted by silentdaredevil2
i had hasports on my Eg hatch and the vibration was nuts compared to stock. And they were the 62A durometer. I'd make a set if i knew someone would buy them .
#12
Re: Motor Mount Fab
Originally Posted by I Have An STD
someone will, seriously. there are always dudes looking for solid mounts on the cheap. what do they cost you to make?
#16
Re: Motor Mount Fab
Originally Posted by silentdaredevil2
what are you referering to, when you say filling it?
Here is the link: https://www.homemadeturbo.com/tech_p...nts/index.html
This will help with wheel hop. It helped so much for me that with a good no slipping clutch and azenis rt-615 tires for grip that I just break cv-axles. 1-2 cv-axles per year on N/A setup.
With my S/C on the d16z6 I just have instant wheel spin and understeer.
#18
Re: Motor Mount Fab
I work in a polyurethane shop. They will be filled with solid urethane not those cheesy inserts. probably around 60-70 "A" durometer. I just did a little redesign on the bracket to the motor to make them a little lighter.
as follows
And the rear
I still need to work up the passenger side tranny mount though.
as follows
And the rear
I still need to work up the passenger side tranny mount though.