Made a turbo header today :)
But no up close pictures :(
But there are some pictures at the bottom of the page on this link http://www.eville140.com/starlet9.html Later Randy |
Re: Made a turbo header today :)
sweet... i love old school yotas. How much did you pay for the car?
|
Re: Made a turbo header today :)
|
Re: Made a turbo header today :)
wow it's come a long way, keep us updated
|
Re: Made a turbo header today :)
your log mani was pimp :6
http://www.eville140.com/starlet5/log.jpg |
Re: Made a turbo header today :)
good ---- man, looking good :y
|
Re: Made a turbo header today :)
Had no idea Starlets were RWD. Welcome to HMT BTW.
Craig |
Re: Made a turbo header today :)
Wow the project looks like its coming along nicely.Is this a drag or street car?I love old rwd imports.I have been wanting a RX2or3 for a while to make a drag car.
|
Re: Made a turbo header today :)
I love those things! There was a guy at the track with a Rotary with what seemed like a 400 shot on it. That thing flew.
|
Re: Made a turbo header today :)
The log mainfold was the first try, it probaby would of worked just as well. But I wanted something that mounted the turbo up a little higher. The engine looked a little lopsided with the turbo mounted down low.
Plus I have a little downtime while I wait for the seats to arrive so I can finish the cage. Going to make a stainless minfold from weld L's next, the one I just made is from 1 5/8" 16 gauge steel j-bends (and it was a PITA) Later Randy |
Re: Made a turbo header today :)
yo nice looking starlet very different project nice work PROPS O0
|
Re: Made a turbo header today :)
nice randy. its getting there. did I read 4130 on the cage correctly? you using chromemoly? man you got me wanting to swap my stuff in the 75 corolla really bad now. I was thinking about what you said as far as leaving it toyota powered. and the thought has crossed my mind a few times. is the 3tc short block and tough as a TF shortblock? I'm really getting pissed with this PCMX software and looking to go standalone and if I do that I could just run toyota power all together and shave off alot of weight.
|
Re: Made a turbo header today :)
Looks great Randy?
What kind of bender did you use for the cage? I'm thinking about buying a bender and have gt350 do the welding for me since he's a better welder. :) |
Re: Made a turbo header today :)
sexy
|
Re: Made a turbo header today :)
The 3TC block and crank are darn strong :), but pretty much everything else has to be replaced :(.
But I needed a cahnge, so I went for it. I still have never even heard a 3tc run. lol Yep using 4130 for the cage, figured since I have a tig now I might as well use it as much as possible. The bender I am using is from pro-tools http://pro-tools.com/105.htm I also picked this up and it has been a great help http://www.2020softwaresolutions.com/prod02.htm I'n hoping for 400hp at the wheels, that along with a raceweight around 2300# along with rear drive should put it into the 6's (1/8th mile) pretty easy. Sure is going to be fun driving to the track, bolting on the slicks and wheelie bar and having some some fun :) I hope to have some pictures of the car stting on dragliyes here soon.. not really ready for them but I need some motivation. Later Randy Later Randy |
Re: Made a turbo header today :)
Originally Posted by Eville140
The 3TC block and crank are darn strong :), but pretty much everything else has to be replaced :(.
But I needed a cahnge, so I went for it. I still have never even heard a 3tc run. lol Yep using 4130 for the cage, figured since I have a tig now I might as well use it as much as possible. The bender I am using is from pro-tools http://pro-tools.com/105.htm I also picked this up and it has been a great help http://www.2020softwaresolutions.com/prod02.htm I'n hoping for 400hp at the wheels, that along with a raceweight around 2300# along with rear drive should put it into the 6's (1/8th mile) pretty easy. Sure is going to be fun driving to the track, bolting on the slicks and wheelie bar and having some some fun :) I hope to have some pictures of the car stting on dragliyes here soon.. not really ready for them but I need some motivation. Later Randy Later Randy |
Re: Made a turbo header today :)
Man that is some awesome work! That car is looking pimp for real. Keep us posted, I will check your site! Oh and congrats on Newborn :)
|
Re: Made a turbo header today :)
Originally Posted by gt350
cool didn't realize you bought a tig. I just bought a 185 precision tig from lincoln myself. awesome machine. it's getting there. keep up the good work. you'll be beating your 10.88 here before you know it. I've never heard a 3tc either, but I have heard a 2tc. naturally aspirated though. lol Later Randy |
Re: Made a turbo header today :)
this is a cool pic for two resons
1. father hood is worth more then any car ever will be. 2. that kid is giving the world the finger! http://www.eville140.com/zoe/zoe1.jpg also your car basically owns! NEUMAN |
Re: Made a turbo header today :)
Good Eye Neuman! Hey are those 13 inch wheels ( the black ones) ? What kind of tires? Maybe I'll keep my 13's if I can get some good tires for them. Nice Job !!!!!!
|
Re: Made a turbo header today :)
Woah your bady in that pic is flipping off the photographer! lol.
|
Re: Made a turbo header today :)
rady you makin that starlet after bruces? think it's gonna be faster? keep us posted...
nice project!btw how much your crew chief work a good weekend for? i need a new wheel stud and lug nuts possibly a few more projects (damn honda) :P |
Re: Made a turbo header today :)
i dont see this heater
|
Re: Made a turbo header today :)
nice kp! i own one too, but it's an 83. keep us updated on the car!!
|
Re: Made a turbo header today :)
Lookin' good man. I got you webpage in my favorites list. ;D
I've always wanted '84 and older starlet. |
Re: Made a turbo header today :)
Damn it Randy, you better share this on TF ;D
Need better pics! |
All times are GMT -5. The time now is 07:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands