Just passed my bend test for welding class no.1
well I just took a dot style test for my welding in boces. was pretty cool make a few welds up hill down hill and sideways and then we hack it up and send it to a hydro jack and bend it in half. lol make or break right then. anybody else taking welding classes? I will get some pics up later this week. next week tiging piping getting ready to make some ram horn mani's ;D
|
Re: Just pasted my bend test for welding class no.1
Just starting some welding classes as part of Millwrights schooling.No tig for me though just shitty arc welding.I'm going to take some private tig lessons this winter so when a buy one in spring I can start fabbing me a ramhorn and a million other things.Do you find the tig harder to learn than arc or wire feed?
|
Re: Just pasted my bend test for welding class no.1
I worked for a short time as an instructor, now I'm just a run of the mill blue-collar welder.
Tig is going to be a lot more involved than wirefeed. You'll have to be able to use both hands, and in some cases a foot to manipulate the puddle and form a good weld. The most frustrating test I had to pass was copper-nickel pipe penetration. Good luck with your classes. |
Re: Just pasted my bend test for welding class no.1
where u takeing class at
|
Re: Just pasted my bend test for welding class no.1
maybe you should try passing english class...
|
Re: Just pasted my bend test for welding class no.1
I was thinking about taking some welding classes but not sure yet,... lets see those pics!
|
Re: Just pasted my bend test for welding class no.1
Originally Posted by 95IntegRacer
maybe you should trying passing english class...
|
Re: Just pasted my bend test for welding class no.1
Originally Posted by shanerv
Originally Posted by 95IntegRacer
maybe you should trying passing english class...
atleast he has a turbo project on here. unlike your fake asses. you fuckers are so pathetic that you need to pick on someones disability. just so u can feel good. you ------- shitbags. |
Re: Just pasted my bend test for welding class no.1
Originally Posted by 90dx
Just starting some welding classes as part of Millwrights schooling.No tig for me though just shitty arc welding.I'm going to take some private tig lessons this winter so when a buy one in spring I can start fabbing me a ramhorn and a million other things.Do you find the tig harder to learn than arc or wire feed?
and I am currently taking classes at boces. in western ny was a free clase offered from a ged class I was taking at the time. I will be going back this january to take the 2nd class for high tensile steel and propably stainless I am going to work on getting certified as a dot approved welder with the 1" thick plate bend test. : ) |
Re: Just pasted my bend test for welding class no.1
Originally Posted by buk9tp
Originally Posted by shanerv
Originally Posted by 95IntegRacer
maybe you should trying passing english class...
atleast he has a turbo project on here. unlike your fake asses. you fuckers are so pathetic that you need to pick on someones disability. just so u can feel good. you ------- shitbags. |
Re: Just pasted my bend test for welding class no.1
Originally Posted by 95IntegRacer
Originally Posted by buk9tp
Originally Posted by shanerv
Originally Posted by 95IntegRacer
maybe you should trying passing english class...
atleast he has a turbo project on here. unlike your fake asses. you fuckers are so pathetic that you need to pick on someones disability. just so u can feel good. you ------- shitbags. *edit* i just noticed u may or may not have been talking about linkmustang. sorry if you werent. |
Re: Just pasted my bend test for welding class no.1
Originally Posted by shanerv
Originally Posted by 90dx
Just starting some welding classes as part of Millwrights schooling.No tig for me though just shitty arc welding.I'm going to take some private tig lessons this winter so when a buy one in spring I can start fabbing me a ramhorn and a million other things.Do you find the tig harder to learn than arc or wire feed?
and I am currently taking classes at boces. in western ny was a free clase offered from a ged class I was taking at the time. I will be going back this january to take the 2nd class for high tensile steel and propably stainless I am going to work on getting certified as a dot approved welder with the 1" thick plate bend test. : ) |
Re: Just pasted my bend test for welding class no.1
That is about what I figured.I own a wirefeed and am starting the arc lessons monday so I think once i grasp Arc the transition to Tig should be alot easier.It has been a progression slowly from solder, wirefeed, arc then Tig.Hopefully soon enough there will be no more buying manifolds and paying fabricators.Thanks for the info. :)
no problem. I actually just tried out the mig on wednesday lol man after learning acr that was a joke haha just point and shoot it. you will def benifit from the arc lessons. and I can't wait to not have to pay for and mani's either plus always cool when you open the hood and say yep I made the complete exaust mani for my turbo setup. and you would have just saved like umm 300+ $$ enjoy the classes and let me know how it goes. O0 |
Re: Just passed my bend test for welding class no.1
ah nah i was talking about shanerv and his "pasted welding test"
|
Re: Just passed my bend test for welding class no.1
Originally Posted by 95IntegRacer
ah nah i was talking about shanerv and his "pasted welding test"
but im sure you can see how i made that mistake :P |
Re: Just passed my bend test for welding class no.1
Originally Posted by 95IntegRacer
ah nah i was talking about shanerv and his "pasted welding test"
|
Re: Just passed my bend test for welding class no.1
what are you trying to say... that I dont have a turbod car? if thats the case your wrong and If you think im jealous because you passed your welding test... good job with that and better luck next time graduating high school... high school diploma > ged
|
Re: Just passed my bend test for welding class no.1
you may have a turbo'd car, and good for you :). But post up some pics of stuff you've fabbed for your car, or shut up :P
|
Re: Just passed my bend test for welding class no.1
If you want to learn tig go learn how to torch weld.
|
Re: Just passed my bend test for welding class no.1
Originally Posted by slappynuts
If you want to learn tig go learn how to torch weld.
|
Re: Just passed my bend test for welding class no.1
The first exhaust manifold i ever built was done with a torch. :6
|
Re: Just passed my bend test for welding class no.1
dude, i'm dutch, and i own linkmustang at speaking english
|
Re: Just passed my bend test for welding class no.1
Shane I'm full blown diabetic I just rest the heel of my right hand on the object and use my left to help me move and keep it steady. So Far I'm all self taught but I'm registering for classes in DEC. and start in Jan. Welding and fabrication. Good luck and take care of yourself before it goes full blown. Link you rock even if you can't spell post some more videos.
DL |
Re: Just passed my bend test for welding class no.1
Im in welding class in high school... and yes oxy welding is a good skill to learn before you tig... tig sucks when you weld alum. cuz when you contaminate it and have to start over and ball the tungsten up again..
|
Re: Just pasted my bend test for welding class no.1
Originally Posted by sdmx6
The most frustrating test I had to pass was copper-nickel pipe penetration.
I spent years welding that stuff, and it's really pretty easy to weld when you get used to it. It's not as sensitive to heat as stainless is. And for those that use the term "arc welding".... tig IS arc welding, Mig IS arc welding, stick IS arc welding... Oxy-acetylene? nope, guess why.. cause there's no arc there!!
Originally Posted by shanerv
I am going to work on getting certified as a dot approved welder with the 1" thick plate bend test. : )
Also, if the DOT specs are similar to ASME or AWS specs, speaking of material thicknesses, your 1" test will only certify you to weld something like 1/2"-2" plate...which is not very useful. 3/8" plate will certify you to weld thicknesses that you are more likely going to encounter. You don't have to learn to stick weld before doing tig welding. I taught welding for quite a while, for Heil trailers. They didn't do any stick welding. It was all mig and tig. I found it didn't make much difference whether they did mig or tig first, even. I had pretty good success teaching tig welding to people that had never seen an arc before. I had guys that could pass AWS tests on aluminum within a week or two.
Originally Posted by 91backinblack
when you contaminate it and have to start over and ball the tungsten up again..
You will very seldom see professionals do the old copper block and switching polarity thing to ball up the tungsten...unless they either like the habit, or are doing xray work. |
Re: Just passed my bend test for welding class no.1
well the 3/8 stuff is easy anyways. I passed that with ease. I would agree that 1" is not going to be used as much by anymeans. But my instructor seemed to think it was a pretty big thing. I actually just tried a 1" test on tuesday just for the fun of it,but I was kinda in a rush to get it done and ended up getting it a little bit to hot and it crystlized in the metal. It broke at 10 tons. So I guess I will have to work on that. I actually have got a 3/8 plate to bend complety in half. It was not xrayed though but I think that is would have passed that anyways. well no more classed till January kinda sucks but at least I will have some time to practice in between times.
|
Re: Just passed my bend test for welding class no.1
Originally Posted by shanerv
well the 3/8 stuff is easy anyways. I passed that with ease. I would agree that 1" is not going to be used as much by anymeans. But my instructor seemed to think it was a pretty big thing.
Originally Posted by shanerv
I actually just tried a 1" test on tuesday just for the fun of it,but I was kinda in a rush to get it done and ended up getting it a little bit to hot and it crystlized in the metal.
If you havn't seen a procedure, you need to ask for one. |
Re: Just passed my bend test for welding class no.1
pics are coming this weekend promise. lol borrowing my dads camera
|
All times are GMT -5. The time now is 11:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands