Homemade DIY Turbo Fitting
 

Well I couldn't afford turbo adapter fitting so a buddy of mine ended up fabricating one. He used a piece of metal plate and then welded the plug on the top with a hole tapped in it already. Then he used a drill to make the holes for the screws.

I used a dremel to cut the sides and sanded the edges. Then the product was done.

Enjoy:

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

Re: Homemade DIY Turbo Fitting
 

make sure it sits flush and aint warped or anything or else its useless... good job on the homemade fitting tho

Re: Homemade DIY Turbo Fitting
 

use some silicone around the flange and it should be good to go =)

is it steel or aluminum?

Re: Homemade DIY Turbo Fitting
 

its steel

Re: Homemade DIY Turbo Fitting
 

That is some pure homemade action there.

Re: Homemade DIY Turbo Fitting
 

not to shabby, maybe even make a thick gasket for it

Re: Homemade DIY Turbo Fitting
 

haha i'm using the gasket silicon high temp maker along w/ the gasket i got from my friend.

Re: Homemade DIY Turbo Fitting
 

i did that a couple of weeks ago, didnt work, it was totally fubared.

Re: Homemade DIY Turbo Fitting
 

i thought about doing the same thing but with a thicker flange

Re: Homemade DIY Turbo Fitting
 

um the last turbo i had on the joedirt zc (red crx) didnt have threads in the oil feed hole but instead of making a flange i just taped the hole for the fitting

Beau