HMT Blast Cabinet
Got a $30 ($24 with 20% coupon) blasting "kit" from harbor freight
Spent another $18 or so on the other parts. Plastic sheet was free, rubber thing is a firewall A/C hose grommet. Sand trap is a scotch-brite pad. Waiting for caulking to dry http://img117.imageshack.us/img117/3...8069864er0.jpg http://img187.imageshack.us/img187/5...8083368eb7.jpg http://img184.imageshack.us/img184/6...8092903ip3.jpg |
Re: HMT Blast Cabinet
Bad ass. I want to see it in action.
|
Re: HMT Blast Cabinet
The window on top will be glazed over after the first blasting or the top will pop off from the pressure. Cool idea if it works.
|
Re: HMT Blast Cabinet
were a resporator with that bad boy!
|
Re: HMT Blast Cabinet
Originally Posted by stillnoturbo
The window on top will be glazed over after the first blasting or the top will pop off from the pressure. Cool idea if it works.
Didnt really think that through thoroughly but it'll get very little use. It has a ~3" x 2" vent with the scotch-brite on it. Im hoping that will keep the pressure in check. I'll be giving it a test drive tomorrow. |
Re: HMT Blast Cabinet
very nice!
window won't glaze over too bad, just gets dusty. some people tape those clear plastic overhead projector sheets on there, or you can just replace the glass every so often. If you can find a way to hook up a shop vac through the scotch bright it would be money. It'll keep the dust down and provide a constant vacuum (even when blasting) so you wont have dust blowing out the area around the gloves (or any other leaks). Might need a better filter than scotch bright so you don't fry your shop vac. try it and see! |
Re: HMT Blast Cabinet
This why I love HMT :y
|
Re: HMT Blast Cabinet
i was going to build one out of an old washer sink. you know the plastic tub drain sinks
|
Re: HMT Blast Cabinet
you got pics of HF blasting "kit"
|
Re: HMT Blast Cabinet
just awesome.
|
Re: HMT Blast Cabinet
Originally Posted by N/A mike
you got pics of HF blasting "kit"
http://www.harborfreight.com/cpi/cta...emnumber=30979 http://www.harborfreight.com/cpi/pho...0999/30979.gif |
Re: HMT Blast Cabinet
i was looking at getting that, i'm too cheap to buy media though.
i was gonna go to the beach and grab a 5 gal bucket of sand, but some people told me it's not a good idea. i figured i'd make a decent sized sand box in the back yard and lay the parts in the sand then just blast away. let me know how it works out, what are you gonna use for media? |
Re: HMT Blast Cabinet
I got a 25? lb of glass beads from HF for like $15 or something.
I ended up riveting the gloves to the box b/c I'm impatient. http://img75.imageshack.us/img75/9803/img0172gv1.jpg befores: http://img75.imageshack.us/img75/9418/img0174tz8.jpg http://img185.imageshack.us/img185/2241/img0138yo9.jpg afters: http://img75.imageshack.us/img75/2948/img0175dj4.jpg http://img185.imageshack.us/img185/1171/img0173tk2.jpg |
Re: HMT Blast Cabinet
did you use a HF riveter? ;D
looks good, but you missed a couple spots. |
Re: HMT Blast Cabinet
Originally Posted by N/A mike
did you use a HF riveter? ;D
looks good, but you missed a couple spots. Went pretty quick. Cleaned the wheel in 2-3 minutes and maybe 10 minutes on the plate. Woulda been much faster but my compressor holds like a teaspoon of compressed air. |
Re: HMT Blast Cabinet
Originally Posted by N/A mike
i was looking at getting that, i'm too cheap to buy media though.
i was gonna go to the beach and grab a 5 gal bucket of sand, but some people told me it's not a good idea. i figured i'd make a decent sized sand box in the back yard and lay the parts in the sand then just blast away. let me know how it works out, what are you gonna use for media? if you use a cabinet then you can recover the media, i recommend the glass beads, but make sure you got eye protection because that ---- hurts when its in your eyes |
Re: HMT Blast Cabinet
I made basically the same idea out of cardboard a while back. I should have posted that mofoker O0 Nice, looks professional! lol
|
Re: HMT Blast Cabinet
Looks great!
|
Re: HMT Blast Cabinet
jb weld?
i like it. hmmmmm my compressor will just run that... sure wish those HF HVLP spray guns could coat a car. my civic needs to be painted fierce |
Re: HMT Blast Cabinet
thats awesome man, i'm going to hf this weekend. i'll have to check it out
|
Re: HMT Blast Cabinet
Originally Posted by Toysrme
jb weld?
i like it. hmmmmm my compressor will just run that... sure wish those HF HVLP spray guns could coat a car. my civic needs to be painted fierce |
Re: HMT Blast Cabinet
really? pics of a car done with one? most of them are what we use to spray primer on sheetrock.
|
Re: HMT Blast Cabinet
You can get a true cabinet for $200> and it looks 20x better than that.
|
Re: HMT Blast Cabinet
Originally Posted by crx2211
You can get a true cabinet for $200> and it looks 20x better than that.
|
All times are GMT -5. The time now is 09:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands