Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

It will run as much as fuel system will let 23-26psi
1000ccs, walbro 255 for now, and GTK 650 Turbonetics.

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

whats in the engine? is it sleaved?

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

Eagle stroker kit and darton sleeves.

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

I would say 20psi with racing gas, if you find a good tuner :6

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

Same tuner as mine.
http://seattle.craigslist.org/see/aos/811572795.html
Red engine with the turbonetics turbo @ the bottom of the page is my bros

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

good luck ;D

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

Any tips haw do I make my HomeMade Oil Breather Catch Can....???? :6

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

So all that does is filter the blowby as it leaves your block? Why go all baller when you can just run the tube out of the block for all the more that does.

If you're going to go through the bother of putting in a catch can, run a tee to two check vavles. One to vac of mani, one to slash cut in exhaust, done.

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

thats what i have right now and it dosen't help.... :(

Re: Haw do I make a OIL BREATHER CATCH CAN....any tips please
 

Unlike me, my brother is a baller and buys top of the line ----. I don't even have a catch tank in my sol, it's just shooting all the ---- sraight to the ground.