Gaskets help
do you guys make ur own gaskets, is there a sheet of some material that i can cut out my own gasket, i have a fucked up volvo inlet flange, i got an extra flange machined for me but now i need a gasket. :y
|
Re: Gaskets help
I know a guy who has used "blue" RTV on Skylines and other imports a few times, and says it works good. :8
|
Re: Gaskets help
copper rtv works fine usually, but its a good idea to use a gasket as well.
|
Re: Gaskets help
Flush both flanges on a belt sander or mill, a little copper RTV Goop and you'll be fine.
|
Re: Gaskets help
Got plenty of gaskets, let me know if you need em.
|
Re: Gaskets help
What about gaskets for a Hot side? Like what if there are no gaskets out there in existance? Thought there was some goop in a tube that could be used....just can't remember what it's called or where to get it.
|
Re: Gaskets help
Cant you buy gasket material sheets at Napa or some place like that?
|
Re: Gaskets help
yeah, but paper gaskets and exhaust high temps dont mix well.
|
Re: Gaskets help
1 Attachment(s)
Attachment 33759
homemade copper gaskets. Buy a 1' piece of round copper pipe ( i couldnt find copper sheets thick enough) and cut it in half down the center. Unfold and pound flat. then trace the flange onto the "sheet" with a sharpie and cut it out with a combination of hole saw, tin snips, and a grinder. I make all of my exhaust gaskets like this. |
Re: Gaskets help
copper sheet metal.... it can be bought, my neibhor has a sheetmetal shop with a ton of it
|
Re: Gaskets help
Originally Posted by sailman
copper sheet metal.... it can be bought, my neibhor has a sheetmetal shop with a ton of it
|
Re: Gaskets help
the sheets they sell at autoparts stores only hold up to 300* (thats there high temp). I put it on and tried it and it stunk so bad that i thought i was goin to have to pop my hood and aflame come out.
|
Re: Gaskets help
on my setup i used autozone item # 2499 or i think its 85505.....cut it to size(which is not easy) but i guess if you have more then some wire cutters it will be .....put it in between my mani and turbo holds nicely no leaks....its like 15$ for a big ass sheet you'll probably use about 10% of it.
|
Re: Gaskets help
Originally Posted by Skuce
what thickness would be good?
|
Re: Gaskets help
^^^ no kidding
with the way copper is going it would be cheaper to make all the gaskets out of platinum. ugh |
All times are GMT -5. The time now is 08:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands