fixing floor boards...getting better with fluxcore
Im fixing the floor boards on my new car. the passenger side is almost done...needs some more work along the side, then i have to seal the bottom.
BEFORE: http://i7.photobucket.com/albums/y29...stblood033.jpg AFTER: http://i7.photobucket.com/albums/y29...ownpipe014.jpg http://i7.photobucket.com/albums/y29...ownpipe016.jpg http://i7.photobucket.com/albums/y29...ownpipe015.jpg DRIVERS SIDE: http://i7.photobucket.com/albums/y29...ownpipe017.jpg It sucks!!! But im happy with how clean and sturdy the weld in came out. The same 85 amp flux core welder from HF i used to make my sex downpipe. Any suggestions on how to seal it? Im thinking window weld, and then paint, and undercoating over it. And how do i get the gas/hatch door relase handle out of there? Thanks. |
Re: fixing floor boards...getting better with fluxcore
Its fun to put out small fires every 10 seconds from the sound deadening or undercoat starting on fire over and over again. ;D
|
Re: fixing floor boards...getting better with fluxcore
the gas and hatch levers can be removed by takeing off that cover should be a little screw on top and then you will see to bolts on the side of the car that hold it on.
|
Re: fixing floor boards...getting better with fluxcore
seal it with roof patch(thick one) and then place a clear plastic bag over it
|
Re: fixing floor boards...getting better with fluxcore
^good idea. would you suggest doing this on top (inside) or underneath (outside) the car?
|
Re: fixing floor boards...getting better with fluxcore
throw that car away for your own personal safety. I have 10 bucks that says I could kick straight through that patch.
|
Re: fixing floor boards...getting better with fluxcore
haha...come down and try...its stronger than stock floorboards.
|
Re: fixing floor boards...getting better with fluxcore
dude wtf...does that car have some special value to you or something that you want to keep it? looks ok but i think i wouldve cut back more so it doesnt just come back, unless the pics are deceiving
|
Re: fixing floor boards...getting better with fluxcore
oh my gosh that's sick nasty. even the cars at the junkyard don't have floorboards like that.
i guess good work on the repair, but why the heck would you want that as a "new" car? You get it for free? |
Re: fixing floor boards...getting better with fluxcore
how thick is that metal yours welding in...i hope its pretty thick since its not bent the same way as the stock ---- (strength) so i hope it makes up for it in thickness
|
All times are GMT -5. The time now is 08:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands