AN fitting help
 

So I got some -4 stainless steel braided hose from Summit racing for my oil feed line, and I can't freaking get the hose ends on there. I've spent at least an hour and just managed to make my hose about 6 inches shorter. My thumbs are full of holes, so does anyone have any good tips or writeups on how the hell to get this ---- on there?

Re: AN fitting help
 

http://www.anplumbing.com/SWIVEL_SEAL_HOSE_ENDS.html

Watch the youtube video.

Re: AN fitting help
 

thank you for that liink. I've never visited Earl's website and that video is very helpful....i've always wondered how those fittings were assembled. I've never used them before

I'm a O0 rific :1

Re: AN fitting help
 

awesome link, thanks a lot


i saw that they had assembley lube for sale on summit, so i tried putting some oil on the outside of the SS and i still couldn't get it to go in there. now i see what its really used for.

guess ill go to lowes and get one of those wide ass chisels

Re: AN fitting help
 

electrical tape is the real key to putting those fitting on. i didnt watch the video so i dont know what was in it, but put the tape on where you want to cut, then cut in the middle of the tape. that will keep the wire from fraying. lube the inside of the hose and put your fitting on.

Re: AN fitting help
 

video shows the guy cutting the braided hose with a sharpened chissel and a hammer on a table with no tape. It frayed a little bit at the ends, but it was pretty clean for the most part. I can see how some tape would prevent the fraying. But since its braided, isn't it going to fray no matter how its cut?

What other things do you guys use to cut stainless braided hoses???

Re: AN fitting help
 

compound shears :)

Re: AN fitting help
 

that looked like it worked pretty good. i use tape and a cutoff wheel when i do it, but to each their own

Re: AN fitting help
 

hack saw, taped with masking tape

Re: AN fitting help
 

for the record, a vice makes this about 1000000000000000 times easier

actually made one up today in about 15 minutes