Re: favorite fabrication tool
 

has to be my mig welder, and cut off tool, but when i go to my dads work i love his jizsaw with greese ---- running on the blade so it cools the medal down, makes some badass cuts, and my millermatic tig at shcool ^-^

Re: favorite fabrication tool
 

Horizontal BandSaw

Then 4.5" Angle Grinder

Re: favorite fabrication tool
 

my harbor freight 4.5" angle grinders. one with a cutting disc and one with grinding disc.
just need a third one for the wire wheel. i'm too lazy. :X

Re: favorite fabrication tool
 

I LIKE MY 10MM DEEP SOCKET

Re: favorite fabrication tool
 

4.5" angle grinder with a flapper wheel to clean up my nasty flux core welds :-X

Re: favorite fabrication tool
 

me and daves old as vintage miller sincrowave tig, oh and our plasma cutter.

Re: favorite fabrication tool
 

I have to have my air grinder, and nifty vice.

Re: favorite fabrication tool
 

I must say that a vice and your foot are some of the best things when you're welding chargepipes ;)

Re: favorite fabrication tool
 

my ebay special chop saw fo sho!

Re: favorite fabrication tool
 

I had a cheap 14" chop saw I used for a month ( heavily) and the bearings went and the arbor wobbled. I bought a Milwakee 14" with a Cast table and its ------- awesome. Was only like $170 shipped.