HomemadeTurbo - DIY Turbo Forum

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Fabrication (https://www.homemadeturbo.com/fabrication-14/)

- - custom made IC? (https://www.homemadeturbo.com/fabrication-14/custom-made-ic-58304/)

Hellbert

03-26-2006 05:42 PM

Re: custom made IC?

Quote:

Originally Posted by Joseph Davis

You CAN NOT cut the core, AT ALL. There is a header (end) plate that is individually soldered to each and every last tube - you cannot replicate this. You cut the end tanks off as close as possible to the header plates and go from there.

i was told you can cut left to right with the tubes but NOT top to bottom, correct? you can with a steel like radiator (ive done it befor) but not with aluminum

UltimX

03-27-2006 01:06 PM

Re: custom made IC?

Well, i gave up on the idea since u can't cut the core. Thanks guys

Tom-Guy

03-27-2006 08:53 PM

Re: custom made IC?

Yeah you can cut between the tubes to make a side to side flowing core shorter, but you can not cut the tubes themselves without trouble.

All times are GMT -5. The time now is 05:11 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page