crx dash into a civic
 

has any one put a 90 91 crx dash into a 90 91 civic hb? i was woundering if every thing was the same or what all i would have to change

Re: crx dash into a civic
 

Yes it fits.Looks better as well.

Re: crx dash into a civic
 

yeah it works, and yes the Si dash does look really good. I just mounted my boost, oil pres, and AF gauge on it and they look great. I just cut 2.25" holes in the little slot under the radio and then used sheet metal to mount the af and make it adjustable. I'll post some pics

Re: crx dash into a civic
 

sweet dude. what all do i need to put that dash in?

Re: crx dash into a civic
 

You need the Civic and the CRX dash

Re: crx dash into a civic
 

i all ready have the civic one i was asking what all i need from the crx dash to put it in my car like panels that are differnt the around the gauge cluster or what not

Re: crx dash into a civic
 

You need a entire dash.The whole thing.Cluster is the same.

Re: crx dash into a civic
 

none of the heater core or heat ducting are different? that is my major question i know iam going to need like the glove box dash little dash panel pices vents center counsel

Re: crx dash into a civic
 

Hmm cant remember off hand.I will try to check for you I own a 90hatch and a 88CRX SI.

Re: crx dash into a civic
 

You need all the pieces from the CRX dash, cluster cover, consle, etc. You will also need the steering column cover from the CRX because it is different on the Civic and CRX

Re: crx dash into a civic
 

make sure you're putting a 88-89 dash in a 88-89 or a 90-91 in a 90-91 or else the gauge clusters will be different and you have to cut all your wires and re solder, it's not that hard thought actually. I found a good write up somewhere and did it in about an hour, swapping gauge clusters that is.

Re: crx dash into a civic
 

Biggest difference in the swap is the crx's use vacuum actuated heater controls, and every hatch that i've seen uses cables. The cable setup *should* be able to stay and fit in the same opening on the crx dash. Or if you want to get a little more creative, get a center console section from a 90 or 91 integra and modify it. That's what i did for my hatch, and everyone thinks it's a modded crx dash. Downside is that it's still won't curve towards the driver's seat like the crx and integra dash's.

Re: crx dash into a civic
 

the only realy thing that i am worried about is the heater vents lining up. i can make the heater contorl work. or switch the hole crx heater system if i realy have too

Re: crx dash into a civic
 

i did it to my beater it took me like 30 min. no big deal just make sure you get everything. the cover for the steering colum, the cluster cover, console,etc. Looks good to