collector jig for a chop saw, anyonw use one?
hello everyone,
i just got me this 14" bosch chopsaw :thumbup: and i need to make a collector jig for my manifold. anyone ever made one and can post some pics to giveme some ideas? https://i26.photobucket.com/albums/c...k/IMG_5766.jpg thanks |
Re: collector jig for a chop saw, anyonw use one?
I just took the 2nd bolt out of mine all together and just vise gripped it to the fence. It completely sucks doing them with a chop saw. Remember I told you that. You will hate it about the 2nd cut.
|
Re: collector jig for a chop saw, anyonw use one?
Originally Posted by CSaddict
I just took the 2nd bolt out of mine all together and just vise gripped it to the fence. It completely sucks doing them with a chop saw. Remember I told you that. You will hate it about the 2nd cut.
|
Re: collector jig for a chop saw, anyonw use one?
I posted a link on your H-T thread bro....
|
Re: collector jig for a chop saw, anyonw use one?
Originally Posted by racepak
yeah i remember, but i needed a saw anyhow.
|
Re: collector jig for a chop saw, anyonw use one?
Well on my 14" I drilled & tapped extra mounting holes for the fence to ride on for clean 12-15* miter cuts on 1 1/2", 1 7/8", 2", 2 1/2" & 3".
On the bandsaw instead of drilling into the deck what I did was get some angle iron & cut it down afew pieces to about 5" long. Then drilled mounting holes for them to clean cut the same cuts. Miter cuts on a chop saw are easier to setup, but its 30,000 times more dangerous of a cut so dont be newbish, and don't be infront of the workpiece for when you eventually sling a disk, or a pipe. Welding / normal vice grips, and small C clamps go along way to securing the pipe too ;) |
Re: collector jig for a chop saw, anyonw use one?
Originally Posted by Toysrme
Miter cuts on a chop saw are easier to setup, but its 30,000 times more dangerous of a cut so dont be newbish, and don't be infront of the workpiece for when you eventually sling a disk, or a pipe. |
Re: collector jig for a chop saw, anyonw use one?
I tacked the pipe for mine at an angle to some plate and put it in the ------- band saw and stood there and watched it do its thing. Worked great.
|
Re: collector jig for a chop saw, anyonw use one?
Originally Posted by CSaddict
You can do it as i stated above. Just go easy and let the blade do the work. If you push too hard you will kill the blade and slow it down too much.
Not to mention atleast for me you have to take some sandpaper rollers to clean up all the rough edges from the blade. Im going to work on my hf bandsaw this weekend and hopefully get it to cut straight Ill proably be bugging ya again csaddcit about that. |
Re: collector jig for a chop saw, anyonw use one?
what's wrong with the cut? usually it's not enough tension on the blade, and if it's wandering you need to adjust the tracking on it.
|
All times are GMT -5. The time now is 07:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands