b in ek custom manifold to retain ALLLLL!! accesories
 

ya waht you nigs think how hard would this be to do possible i think so the only thing holding me back is attempting to build the manifold :S too much curves and i want a semi equal length but then just might do a log style TURBO DIESEL style O0

im thinking heat wrapping evertything and replacing the rad hose wiht steel pipe where its near the mani and the down pipe will exit through the stock air box hole and come back around and go between the motor and trans (stock location) and running a water to air core inter cooler

any one want to build me one someone local sacramento ca???

heres a quick idea of waht it looks like kinda i have no mouse this was drawn on a lap top wiht no real mouse :S :S

Attachment 16816

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

where is the intercooler gona go? or is it gona be a water to air intercooler?

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

that box before the TB will be a water to air

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

Why would you want the turbo way out there? Keep it close to the head, and you will get quicker spool.

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

yes, but you sacrifice top end slightly.

i wouldn't build it that way unless there wasn't another option. facing the turbo backwards like that is a terrible way to do it because your downpipe will be way too long, and way too low to clear the rad and rad fan... and where are you going to put your intake pipe/filter? there isn't as much room over there as you think once you get a collector, turbo and wastegate in there.

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

it wont work without a CDM turbo and water to air intercooler. it just so happens that i sell those. Hmmm...... makes you think

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

hmmm i have the famous cdm stg3 .63 t3 ex and weaks sacuec .50 t4 cmopressor i just need the cdm water/air charge cooler how big are your iinlets all i could find on eGay way 3.5 and a few 3"
and the down pipe will clear it will exit through the stock air box hole and go close to the trans and radiator will have a slim fan and the waste gate will be by to block below the head feedint from the collector

I WANT THE TURBO IN SUCH A BAD PLACE CUZ I WANT MY AC AND PS KEPT AND I DONT THINK I CAN FIT A BIG TURBO LIKE THAT IN THERE WITH OUT MESSING WITH THE AC SYSTEM IM ONLY PLANNING ON RUNNING 8 PSI CUZ I DONT WANT TO TREAR APART THE MOTOR AND PUT HEAD STUDS AND ----.. I HAD TOO MUCH PROBLEMS WIHT PURGING ON OTHER ---- SET UPS

---- i need
fanges from wierd
cdm air/water charge cooler
but weld bends and thick steel pipe and collector or build one

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

haha you wanna make this crazy manifold yet you have a bungee holding your battery down... good luck

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

my friend borrowed my oem battery holder braket to go to the track they require it so i had to buy this at a gas station to run at the track the time i went over there and realized i dont have ---- holding my batter O0 they let me race 8) so im happy.. com on niglets any suggjestons im leaning making a log stlye manifold

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

i have 2.5",3", and 3.5" water to air inlets/outlets.

i can also do flanges, let me know what you need

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

pm sent!!!

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

Learn english. Then try it out. Look in the old school turbo projects at the race zc, it has a mani like what you are thinking of.

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

Go get a 90-91 integra exhaust manifold (since its a factory 4to1) and make the "stink trap style" HMT that bitch and put it where you want

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

do the 4-2 and twin scroll that ----

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

Agreed. It works in our favor for packaging and it is good for spool. win-win.

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

im downt wit the 4-1 once my candy paint is done im teraring it apart for the custom mani O0

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

Do that ----! ;D

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

sac town in the house....nigga whaaaaaa

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

ya nigga what you up to be in the horse town wat up you have to deal with gay roseville police
you ever come out to meets im trying to set up a anti rice hmt style car meet i think it can only consist of my ---- my borthers hatch and 2 buddys cars

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

I am going to guess that translating this post into english would not reveal that you have actually done any actual work, would it?

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

stfu stupid noob 4 star general here i been from old school vw to mid school honda captain bond0 go sand some bondo down and choack on the dust :X

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

Wait- so did you do any work or no? I'm still not getting it. :1

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

i think your mom did plenty of work with tyrone and then u poped out

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

my brother only speaks ebonics O0

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

Did this 12 year old ever actually build anything? :l

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

idk why dont you search for his post and by the way i wouldnt go around flameing people just cuz you think your cool so sit down and stfu :y

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

i've done a manifold kinda like that on a saturn sl2 5spd it spooled very quickly but i was using a turbo from a volvo.if you want to mount the turbo on the frame of the car it would be good if you had a bracket that let the turbo move freely while the engine moved also a flex pipe would be good so there is less stress on the manifold. as for the intercooler try a top mount and add a fan to it. it would be a really nice setup and easy to install and remove.

as for the down pipe...you'll have to get very creative with that.

good luck man looking forward to seeing it done

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

i went with a cdm cast mani.. so i get to keep ps bump the ac and i was planing to NOT mount the turbo to the frame just let it hang on the manifold

Re: b in ek custom manifold to retain ALLLLL!! accesories
 

if it hangs on the manifold it will cause alot of stress.

check this out:
very well known in the camry community and well respected...

http://htracing3.homestead.com/files/Camry/cameng2a.jpg

good luck on build

YOU MIGHT BLOW THAT MOTOR

??

i am actually working on building a top mount that will keep all acc. few things to work out but its on the way.i have actually seen a pic of one but i lost it an didn't say who made it anyways.

being able to keep all acc would be ideal. I like my power steering

iv seen it done before, but just roll down the windows.

your dp is going to be retarded long,

I would just make it open dump out of the top of the hood or something; now that would be baller

do alot of the manifolds not retain accessories kinda a honda newbie so bear with me