any one know where to buy pre cut..just add weld ram horn kits?
 

ive searched and i guess nto searching the right word...lol should search porn ram horn...:p lol...

any one know of any like this...ive seen them before and was tryign to get a decent manifold cheap...everyone knows more than half of the manifold in the labor for welding...sooo trying to cut out the middle man..

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

anyone that goes through all the trouble of cutting everything and fitting it all is going to spend the extra few minutes and just weld it out. fittment is 90% of the job. welding it out is minimal. you won't save much by trying to find something this route.

any manifold kit you get will require some fabrication skill and cutting.

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

SSauto makes one. You just give it a little bit of time and you'll have pieces to weld together. Really though, I've never heard of a DIY ramhorn...log yeah..ramhorn...that's news to me if there is.

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

Ive seen it before but ive heard that its a pain to put together because you dont have their jigs and through welding the runners can warp slightly making assembly a pain in the ass. This is all honda-tech hearsay though/ But I know one of the bigger name companies sells kits but you have to ask.

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

doesnt tt make a kit kind fo like there log mani kits

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

this was one link i was looking for ...i know it had jg in it...lol

bump for any ramhorn or mini or etc manfolds

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

that ramhorn "kit" still requires that you build the collector and all the extra little pieces that you need to make ---- the right length.

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

That kit is a joke. Not to mention a rip off. Buy a head flange and t3 flange from Aaron for 30 bucks and the 8 weld-els from McMaster-Carr for 72 bucks. Note that's for Mild, stainless is about double at like 20 per elbow. Then a piece of pipe to make the collector from for 8.50. Hmmm 180 for stuff that only cost 110 if you were to buy it yourself. Didn't know ordering stuff from Aaron or McMaster was so hard that you have to pay an addition 70 bucks for someone to do it for you. ::)

Re: any one know where to buy pre cut..just add weld ram horn kits?
 

DId you think they were gonna piece everything together for you for free?