I want to change my cold side intercooler piping to aluminum. I dont have access to a machine that can weld aluminum so.

who can make me some nice 2.5" aluminum cold side IC piping for an EG with a blitz or dsm bov flange for a $100 or less? paypal ready.

 

why don't you mock up the pieces with some tape or something...mark the alignment as to how they need to be welded together, and then take them or send them to someone who can tig?

just a thought.

 

$100 is not engouh to cover the parts and labor. I would charge that just for the welding.

 

I can weld aluminum, but i doubt I could help since I would need the car here to do it. But I can say that trying to get it done for $100 is going to be real hard to do unless you know somebody. And by this post you must not.
You might find somebody to do it fror $100 or maybe a little less if you provide all the parts.

Later
Randy

 

If it was all cut and marked you can get it done for $100.

 

$100 is not enough. Maybe for the labor of welding.

 

In fact if you can deliver (ship) it to me cut and marked and ready to weld, I can get it to you for $100.

 

you and everyone else with a tig.

honestly 100 dollars isnt worth it, if you have to cover shipping back.

 

especially if the fabber is supplying the said flange.

like 98 ctr said, 100 for the welding , never mind materials.

 

I did not know that ---- cost that much, I thought mike was bsing.

but either way it would cost more than $200 to weld one peice in Germany, and its gonna be shitty work, so thats why I posted here.
incase ya'll not know I am in Germany, they have nothing here, and whatever they have its poor quality and overpriced.
Germans are only good at 2 things
1. making cars
2.sexy white girls

everything else is crap.and expensive, and hard to get