89 civic SI build - eek
 

This one is mine, I picked her up yesterday for $1500. Drove with my dad and my buddy in our old shotty sierra 1500, but it made it and didnt break down few :P so 6 hours later and $40.00 worth of long distance charges, here's what i've got to work with.


b18b1 (stock)
greddy turbo mani
t25 adaptor plate
jdm eg6 half rad
stock ls tranny/ clutch/ flywheel.
chinese intercooler


http://photos-a.ak.fbcdn.net/hphotos..._3141266_n.jpg
http://photos-a.ak.fbcdn.net/hphotos..._5796826_n.jpg
http://photos-b.ak.fbcdn.net/hphotos..._3780281_n.jpg
http://photos-c.ak.fbcdn.net/hphotos...4_624566_n.jpg
http://photos-d.ak.fbcdn.net/hphotos..._6505090_n.jpg
http://photos-b.ak.fbcdn.net/hphotos..._3618771_n.jpg
http://photos-c.ak.fbcdn.net/hphotos..._3992548_n.jpg


after it came in, we cleaned her up, took the parts out, and looked over what we needed.

so right now im looking for ic piping, bov, couplers and clamps.
lmk what u got.

-Marty

cheap intercooler piping? use ABS pipe and paint it with exhaust paint.

took all boost parts off; returned to stock, going to do lsvtec and boost later.

all shits forsale!

nice catch good luck with the project.

let the boostin begin.......

Looks like the whole family is into the project!!!!

So yesterday I was bored and staring at this parts truck I had in my backyard, i noticed it had a nice exhaust on it with some decent looking bends


http://photos-f.ak.fbcdn.net/hphotos..._3482558_n.jpg

so 10mins with a grinder and the ---- came loose!

at that point I started cutting out the lenths and bends I needed.

http://photos-e.ak.fbcdn.net/hphotos..._6737519_n.jpg




this is the first pipe on the intake side, first time welding with an $80 princess auto mig. :S

http://photos-d.ak.fbcdn.net/hphotos..._8082010_n.jpg



this is what I did 2 days ago, I put the car back to stock

http://photos-c.ak.fbcdn.net/hphotos..._6487838_n.jpg

and then yesterday I did this.

http://photos-g.ak.fbcdn.net/hphotos...90_87044_n.jpg

http://photos-d.ak.fbcdn.net/hphotos..._7735618_n.jpg



so to tally it up, i need 6 couplers, 12 clams, a bov and a 5 bolt flange for a dp I made. *but if i can find one with the flange on, perfect :)

love the green tape!

lol, well something had to hold it till i pick up couplers!

looking decent so far.

good thinking! you're HMT material.