Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

y8 timing in uberdata

Old 03-23-2006, 07:53 PM
  #1  
0.0 BAR
Thread Starter
 
Join Date: Mar 2006
Posts: 42
Default y8 timing in uberdata

i think the uberdata bin is 16 should i go over the whole map and make it 12? or how should i do the timing part for my y8 on uberdata.
t3t4 is offline  
Old 03-23-2006, 08:08 PM
  #2  
0.0 BAR
 
Join Date: Mar 2004
Posts: 0
Default Re: y8 timing in uberdata

This subject has been beat up many times. There is a thread on the Uberdata forums about it. There is no definate answer. I corrected my maps to base 12 on my EK.
SpankedYA! is offline  
Old 03-23-2006, 08:10 PM
  #3  
1.0 BAR
 
Join Date: Oct 2004
Posts: 309
Default Re: y8 timing in uberdata

I believe what most people are doing is using the Y8 bin and changing just the idle portion to 12*. While keeping the timing at the dizzy at 12*.
Threads is offline  
Old 03-23-2006, 08:22 PM
  #4  
0.0 BAR
 
Join Date: Mar 2004
Posts: 0
Default Re: y8 timing in uberdata

I just removed 4 degrees from the entire map and kept the 12 base.
SpankedYA! is offline  
Old 03-23-2006, 10:13 PM
  #5  
0.0 BAR
Thread Starter
 
Join Date: Mar 2006
Posts: 42
Default Re: y8 timing in uberdata

im using 1.7 and i open stockgsr.bin then import p28.bin ... do i go over the whole timing thing and -4 degrees in both hi and low. and what do you guys put for ur fuel pressure? and do i enable the fuel modifiers box. Thank you for all the help.
t3t4 is offline  
Old 03-23-2006, 10:59 PM
  #6  
1.0 BAR
 
Join Date: Jan 2005
Posts: 425
Default Re: y8 timing in uberdata

Why don't you just import the P2P maps. Look in the development forum for the script to import the P13, P2P and P73 maps.

Just run the stock Y8 map. It will solve your problems.
93turbo16 is offline  
Old 03-24-2006, 01:02 AM
  #7  
3.0 BAR
 
Join Date: Dec 2002
Posts: 3,832
Default Re: y8 timing in uberdata

I think the thing to keep in mind is, regardless of how you make your timing map, what you set your dizzy to should match what is in the idle portion of the map.

This is how I do mine. Nice big chunk of idle timing, no margin for error. When your running a mix and match Engine, IM/IACV, and who knows what code base in some other ECU, the odds of idling rock steady below 750 is slim. Extend the idle timing up to 1500 and over to 14" of load to negate any shity idle ------- with setting your dizzy to match the maps.



If I had a y8, id find a stock y8 map. C/P the whole timing map into UD, enlarge the idle timing area to the same #, (doesnt matter if its 12 or 16), and sync the dizzy w/ a dial back timing gun. Done like dinner.
leed is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mz3bo
Engine Management
90
08-16-2007 12:10 AM
crxfreak88
Engine Management
2
04-26-2007 06:38 PM
hoggy
Hybrid/Tech
2
06-02-2005 12:36 PM
Threads
Engine Management
4
05-11-2005 10:05 AM
rudebwoy
Engine Management
2
10-23-2004 10:24 AM


Thread Tools
Search this Thread
Quick Reply: y8 timing in uberdata


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.