HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Y8 timing revealed niggers... beyond p2p (https://www.homemadeturbo.com/engine-management-10/y8-timing-revealed-niggers-beyond-p2p-58514/)

Tom-Guy 03-27-2006 08:48 PM

Y8 timing revealed niggers... beyond p2p
 
13 dyno runs and some redneck common sense makes for interesting insights. I'm on my cell and four hours from home, so you bags of ---- will have to wait on my sweet ass.

Boosted_StinkyNuts 03-27-2006 09:09 PM

Re: Y8 timing revealed niggers... beyond p2p
 
This bag of ---- cant wait!!! :D

Tom-Guy 03-27-2006 11:18 PM

Re: Y8 timing revealed niggers... beyond p2p
 
Hold on i'm 100 miles away from home still, ------.

BoosTedZSix 03-27-2006 11:26 PM

Re: Y8 timing revealed niggers... beyond p2p
 
you ------- redneck :-*

Reddy 03-27-2006 11:29 PM

Re: Y8 timing revealed niggers... beyond p2p
 
Wait, I thought you rednecks drove your houses or at least towed them. :P

Threads 03-27-2006 11:32 PM

Re: Y8 timing revealed niggers... beyond p2p
 
damn. i cannot wait for this. someone finally went to the dyno....

t3t4 03-27-2006 11:41 PM

Re: Y8 timing revealed niggers... beyond p2p
 
i cant wait too i got my basemap and ---- and im just trieing to get some ---- to datalog on uber but it aint working. post up asap

J-MAN 03-28-2006 12:58 PM

Re: Y8 timing revealed niggers... beyond p2p
 
so what the outcome?

you need a drumroll?

Tom-Guy 03-28-2006 10:15 PM

Re: Y8 timing revealed niggers... beyond p2p
 
I'm in the middle of organizing everything right now, and I'm going to sit on it for about a day yet as I need to lay hands on a Y8 distributor before I'm ready to say some of the things that I'd like to. I'm going to make a savvy guess as to the nature of the P2P ignition table, disclose best timing values, mention some Y8 timing peccadillos, and address the subject Y8 oilling problems. I want to be very thorough, because some of the guys in the Y8 thread on PGMFI need their noses rubbed in how to apply redneck common sense as well as stfu n00b. Only SOHC_MShue, bignig, and you said anything worth reading in that 9 page crapfest - I used your ignition maps from the .bin you posted at one point, thanks for that.

The long and the short of it is that I got a peak 212 whp and 178 wtq revving to 6800-7000 rpms off of 10 psi, timing in the single digit range on the high cam. The low cam likes a little more timing. FYI, the first dyno run had the most timing (13 degrees high cam) and puked coolant into the catchcan. As I pulled timing under boost, it never puked out coolant again, and coolant temps (on a heatsoaked engine!) started going down a few degrees... while ambient temps went up 5 deg F.

It was one hell of a weekend, I really got my head into Steve's car. There was LOTS more in it, but we were limited by stock MAP sensor, and the cam was still 1-1.5 deg off. I'm planning to head back down next month and knock 325+ out of it.

Guy-Fast 03-28-2006 11:20 PM

Re: Y8 timing revealed niggers... beyond p2p
 
jd you da man


All times are GMT -5. The time now is 09:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands