ok im stumped
when i was adjusting my timing if i put the red mark on 0 then the wight one would be at 8 (replaced dizzy fixed)
so i reset the ecu codes and (removed the back up 7.5 amp fuse in my box it reset my clock so i take it the ecu got reset)
the cells still poped up
i take it one is 20 (ELD)
but the 2nd idk should be 36 but there is no such cell in the book or any chart
92 HB, Z6, 3 bar MAP sensor, po6 converted to p28
my buddy did the chipping
there was no problem tuning it
but now after the crash im having problems


(EDIT)
Ok so found out its a stupid jdm traction control light that’s programmed in to crome