Willem Dual Power and 27sf512 - Finally Worked!
I just recently got a Willem Dual Power burner and it came with a SST 27SF512 chip. I had multiple problems trying to erase/burn this chip using the Willem 097G software and Projekteg's how-to listed here -> http://uberdata.pgmfi.org/forum/inde...;threadid=2588 <-
After talking to Xenocron it seems my problems were mainly due to the 097G program, which I had chosen to use in following the how-to. For me, the 097ja program worked first try. I just followed the instructions Xenocron offered: Hook up the parellel cable to the LPT port 1st Hook up the USB cable for power second Open the Willem software, 097ja Make sure it says PCB3 at the top middle Click HELP-->Test Hardware (should say present) Set the jumpers like my picture to erase Put the SST in the ZIF socket correctly Choose the SST chip in the software Click the Erase button (should confirm erase with some other windows in the) Then, load the BIN you want to burn and set the jumpers for burning like my pics Then click the burn button and done Using his jumper configurations seen here -> https://www.homemadeturbo.com/forum/...?topic=40528.0 . Just wanted to post this up to say thanks to Xenocron and incase anyone else has a 27sf512 chip giving them fits. :) |
Re: Willem Dual Power and 27sf512 - Finally Worked!
This could be back from the dead but its a perfect way to do it, I know a lot of people shy away from the sst chips but they shouldnt, just to make it better without links, using xenocrons pics heres how it goes:
To burn: https://www.homemadeturbo.com/forum/...0;id=246;image Like this to erase: https://www.homemadeturbo.com/forum/...0;id=247;image |
Re: Willem Dual Power and 27sf512 - Finally Worked!
Been there.After ------- around for a week or so I now burn tons like nothing.
|
All times are GMT -5. The time now is 12:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands