HomemadeTurbo - DIY Turbo Forum - Who is using the DKU-5 Nokia cable for datalogging?

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - Who is using the DKU-5 Nokia cable for datalogging? (https://www.homemadeturbo.com/engine-management-10/who-using-dku-5-nokia-cable-datalogging-46775/)

Re: Who is using the DKU-5 Nokia cable for datalogging?

Quote:

Originally Posted by myshtern

Quote:

Originally Posted by surfer

if you look for the answers you will find them, it isnt that difficult

Are you Mr. Miagi? If so, you must be confused because I am not the Karate Kid.

If you can help me, then please do so, but dont tell me to look for answers because that is what I am doing.
All I need is the pinout for this cable. Does anyone know where I can find it?

thanks

If i knew the answer without having too look i would tell you but as i dont i can't, i'm not really interested in helping you because i dont think you've looked for yourself. Ask xenocron what program he uses to find an echo between the Tx and Rx, once you have found the live wire and the tx and rx that *should* be enough

Re: Who is using the DKU-5 Nokia cable for datalogging?

'terminal_154.exe" is the program i use...Google it or download any terminal program that can connect to the COM port your cable shows up as...connect wires until ones echos (of course, type at the same time).

Good thread on the Uber forums from J. Davis on this topic as well...thats how I learned :)

Re: Who is using the DKU-5 Nokia cable for datalogging?

i belive i have the same cable as you, i set it up like..... white/shielding(ground) = 1 red = 2 and blue = 4

im not sure witch is tx and rx but this works for me. if your using uber or ecu control you dont cut j12

-joseph