highspeedhomie

hey i have a sohc d16y8 with a greddy turbo kit on it - i have the stock 240cc injectors in it and i am run a chipped p28 ecu in it- i want to put the vtec computer back in it that originally came with the car but i need to know what fuel management i need to run so i can run in between 7- 10 psi saftley- i dont understand the ratios i wasa gonna buy one of of ebay but i dont know which ratio- it says like 8:1 10:1 and 12:1 just curious if anyone else has encountered something like this and what would work best for me

highspeedhomie

cant be the wrong one this one says anything goes so if you dont have an asnwer dont be typing responses unless you can help

boosted_hatch_216

huh? well sounds like you already have the obd conversion unless the motor is in an older civic. what "chip" are you running? you could use uberdata or i think crome is for obd1 but dont quote me on that.

con

you need to read alot before you proced, even if I lay it out for you your not going to understand. Learn to walk before you run

HondaTuner

Shut up, n00b

highspeedhomie

i have the ob1 convsersion already and im running an uberdata program but i have noticed that the car runs clean and is there for every beat - but the only thing is when i start it i get a high rpm idle and it gradually works its way down to 1000rpm and 2000rpm but it revs in between i was told this was normal

jinxy

then you already have the management you need. just get some bigger injectors and a tune you ------- retard

NBLKID

fmu 2:12 raitio