Want your advice on this...
#1
Want your advice on this...
"last time i post here was because i had an accident with a nice audi a8and i was going to buy a complete kit here...but i bought a new ride and i'll be making my own kit"
I just wondering if anyone tried or has something to say about "chip" as a turbo management...
I have seen this on ebay, its a chip that change fuel curve and timing... blablabla... you can read this here : http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
I'm kinda cheap *** on fuel management so i'd like to have your thought or experience on this kind of "management"
Would i still need an fmu?
thank you guys!
Edit: I plan on boosting 7psi on a stock d16z6.. hope it helps
I just wondering if anyone tried or has something to say about "chip" as a turbo management...
I have seen this on ebay, its a chip that change fuel curve and timing... blablabla... you can read this here : http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
I'm kinda cheap *** on fuel management so i'd like to have your thought or experience on this kind of "management"
Would i still need an fmu?
thank you guys!
Edit: I plan on boosting 7psi on a stock d16z6.. hope it helps
#2
#3
Re:Want your advice on this...
You really, really need to read the Engine Management FAQ.
I guess you could just buy the chip, glue it to your ecu, plug the fmu in, buy some good 'ol 86 octane (what does it matter, you are a cheap ***, right?) boost the ****** and see what happens...
I guess you could just buy the chip, glue it to your ecu, plug the fmu in, buy some good 'ol 86 octane (what does it matter, you are a cheap ***, right?) boost the ****** and see what happens...
#4
Re:Want your advice on this...
I was expecting this kind of comment
I already red the management faq, thank you anyway, i should have red more in deth...
...by the way... i'm cheap *** for building my turbo its true, but even if im not turboed right now i do use 94 octane all the time.
I already red the management faq, thank you anyway, i should have red more in deth...
...by the way... i'm cheap *** for building my turbo its true, but even if im not turboed right now i do use 94 octane all the time.
#5
Re:Want your advice on this...
Do not waste your time on an Ebay chip. If you're going to go through the trouble of chipping your ECU anyway, might as well pay someone on this site to create a custom base tune for you, or you could buy your own chip burner (less than $100 at this point) and burn one yourself. You should do yourself a favor and drop $50 on dsm 450cc injectors while you're at it. For less than the cost of a SAFC or VAFC, and slightly more than an FMU, you have engine management which is fully customizable for spark and fuel.
#6
Re:Want your advice on this...
Originally Posted by Will
Do not waste your time on an Ebay chip. If you're going to go through the trouble of chipping your ECU anyway, might as well pay someone on this site to create a custom base tune for you, or you could buy your own chip burner (less than $100 at this point) and burn one yourself. You should do yourself a favor and drop $50 on dsm 450cc injectors while you're at it. For less than the cost of a SAFC or VAFC, and slightly more than an FMU, you have engine management which is fully customizable for spark and fuel.
A+++
Thread
Thread Starter
Forum
Replies
Last Post
Smith-02
General Discussion
28
01-25-2009 01:56 AM